D-Link DGS-6600-48T Product Manual - Page 605

DGS-6604 m show ip bgp show ip bgp To display entries in the Border Gateway Protocol (BGP) routing table, use the show ip bgp command in user EXEC or privileged EXEC mode. show ip bgp [IP-ADDRESS[/MASK-LENGTH [ longer-prefixes] ] | route-map NAME ] Syntax Description IP-ADDRESS (Optional) An IP address entered to filter the output to display only a particular host or network in the BGP routing table. /MASK-LENGTH (Optional) Mask length to filter or match hosts that are part of the specified network. It can be in decimal format (i.e. 8). longer-prefixes (Optional) Displays the specified route and all other specific routes. route-map NAME (Optional) Filters the output based on the specified route map. Default Command Mode Usage Guideline Examples None User EXEC or any configuration mode The show ip bgp command is used to display the contents of the BGP routing table. The following example output shows the BGP routing table: Switch> show ip bgp BGP table version: 13, local router ID: 10.1.1.99 Status codes: s suppressed, d damped, h history, * valid, > best, i internal, S Stale Origin codes: i - IGP, e - EGP, ? - incomplete Network *> 10.1.1.0/24 *> 172.17.1.0/24 Next Hop 0.0.0.0 192.168.1.1 Metric 0 0 LocPrf Weight 32768 0 Path i 45000 i Total Entries: 2 entries, 2 routes Switch> CLI Reference Guide 595