D-Link DGS-6600-48T Product Manual - Page 799

DGS-6604 m show ip source binding show ip source binding Use the command to display IP-source guard binding entry. show ip source binding [IP-ADDRESS] [MAC-ADDRESS] [dhcp-snooping | static] [vlan VLANID] [interface INTERFACE-ID [, | -] ] Syntax IP-ADDRESS MAC-ADDRESS dhcp-snooping static vlan VLAN-ID INTERFACE-ID (Optional) Display the IP-source guard binding entry based on IP address. (Optional) Display the IP-source guard binding entry based on MAC address. (Optional) Display IP-source guard binding entry learned by DHCP binding snooping. (Optional) Display IP-source guard binding entry that is manually configured. (Optional) Display the IP-source guard binding entry based on VLAN. (Optional)Display the IP-source guard binding entry based on ports. , (Optional) Specify a series of interfaces, or separate a range of interfaces from a previous range. No space before and after the comma. - (Optional) Specify a range of interfaces. No space before and after the hyphen. Default Command Mode Usage Guideline Example Not applicable EXEC mode or any configuration mode IP source guard use binding entries that are either manually configured or auto learned by DHCP snooping. The command accepts combination of input options to filter the displayed entry. This example shows how to display IP Source Guard binding entries without any parameter. Switch# show ip source binding MAC Address IP Address Lease(sec) Type VLAN Interface 00-01-01-01-01-01 10.1.1.10 infinite static 100 eth3.3 00-01-01-01-01-10 10.1.1.11 3120 dhcp-snooping 100 eth3.3 Total Entries: 2 Switch# CLI Reference Guide 789