D-Link DGS-6600-48T Product Manual - Page 84

DGS-6604 bgp default local-preference bgp default local-preference Use this command to change the default local preference value. To return the local preference value to the default setting, use the no form of this command. bgp default local-preference NUMBER no bgp default local-preference Syntax Description NUMBER Range of local preference is 0 to 4294967295. A higher number is prefered to a lower number in the comparison. Default Command Mode Usage Guideline Example NUMBER: 100 Router configuration. The local preference attribute is a discretionary attribute that is used to apply a degree of preference to a route during the BGP best path selection process. This attribute is exchanged only between iBGP peers and used to determine local policy. The route with the highest local preference becomes the preferred route. This example shows how to configure default value of the local preference to 200 for autonomous system 65534: Switch(config)# router bgp 65534 Switch(config-router)# bgp default local-preference 200 Verify the settings by entering show ip protocols bgp command. CLI Reference Guide 74