D-Link DGS-6600-48T Product Manual - Page 889

DGS-6604 m terminal timeout terminal timeout Use this command to setup a timeout value, which upon its expiry, will autologout the terminal session . terminal timeout {never| 2_minutes| 5_minutes| 10_minutes| 15_minutes} Syntax Description never Specifies that the terminal session will never timeout.(the default setting). 2_minutes Specifies that when the session is idle over 2 minutes, the terminal will auto logout. 5_minutes Specifies that when the session is idle over 5 minutes, the terminal will auto logout. 10_minutes Specifies that when the session is idle over 10 minutes, the terminal will auto logout. 15_minutes Specifies that when the session is idle over 15 minutes, the terminal will auto logout. Default Command Mode Usage Guideline Examples never Privilege EXEC This timer specifies the length of the session idle time allowed. After this idle timer expires then the terminal session will be auto-logged out. The timer operates regardless of whether the session is established by direct serial connection, telnet connection, or SSH connection. This example shows how to setup the terminal session to never timeout. Switch# terminal timeout never Verify the settings by entering the show running-config command. CLI Reference Guide 879