D-Link DGS-6600-48T Product Manual - Page 611

DGS-6604 m Examples show ip bgp neighbors The example on the next page shows how to display the 10.108.50.2 neighbor. This neighbor is an internal BGP (iBGP) peer. This neighbor supports the route refresh and graceful restart capabilities. Switch# show ip bgp neighbors 10.50.71.253 BGP neighbor is 10.50.71.253, remote AS 8001, local AS 8001, internal link Member of peer-group G1 for session parameters BGP version 4, remote router ID 51.50.71.253 BGP state = Established, up for 0DT0H39M28S Last read 0DT0H39M28S, hold time is 180, keepalive interval is 60 seconds Neighbor capabilities: Route refresh: advertised and received (old and new) 4-Byte AS number: advertised and received AS TRANS: Address family IPv4 Unicast: advertised and received Received 0 in queue Sent 0 in queue Sent Received Opens: 1 0 Notifications: 1 0 Updates: 2 2 Keepalives: 47 45 Route Refresh: 0 0 Dynamic Capability: 0 0 Total: 51 47 Connect retry time is 120 seconds In update elapsed time is 2367 seconds Minimum time between advertisement runs is 5 seconds Minimum time between as origination runs is 15 seconds Default weight 300 For address family: IPv4 Unicast BGP table version 41, neighbor version 41 Index 4, Offset 0, Mask 0x10 G1 peer-group member AF-dependant capabilities: Graceful restart: advertised, received 2 accepted prefixes 3 announced prefixes Connections established 1; dropped 0 CLI Reference Guide 601