D-Link DGS-6600-48T Product Manual - Page 536
server, radius auth-port
View all D-Link DGS-6600-48T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 536 highlights
DGS-6604 m server server Set up a server for different types of methods. Use the no form of this command to delete a server. server {tacacs | xtacacs} IP-ADDRESS [auth-port PORT-NUMBER] [timeout SECONDS] [retransmit COUNT ] server tacacs+ IP-ADDRESS [auth-port PORT-NUMBER] {key KEY-STRING | no-encrypt} server radius IP-ADDRESS [auth-port PORT-NUMBER] {key KEY-STRING | no-encrypt} [timeout SECONDS ] [retransmit COUNT ] no server {tacacs | xtacacs | tacacs+ | radius} IP-ADDRESS Syntax Description tacacs Specifies tacacs authentication. xtacacs Specifies xtacacs authentication. tacacs+ Specifies tacacs+ authentication. radius Specifies radius authentication. IP-ADDRESS Specifies the IP address of the authentication sever. auth-port PORT-NUMBER (Optional) Specifies theTCP or UDP destination port for authentication requests. The port-number argument specifies the port number for authentication requests. key KEY-STRING The key for TACACS+ or RADIUS authentication. This argument is only present for TACACS+ and RADIUS. The key can be from 1 to 32 characters. The syntax is a general string that does not allow space. no-encrypt No encryption for TACACS+ and RADIUS authentication. This argument is only present for TACACS+ and RADIUS. timeout SECONDS The time in seconds for waiting server reply. The range of timeout is 1 - 255 seconds. retransmit COUNT Specifies the number of switch system resend an authentication request to the server when no response is received. The value is from 0 to 3, and 0 to disable the retransmit. Default Command Mode Usage Guideline radius auth-port PORT-NUMBER: 1812 tacacs/xtacacs/tacacs+ auth-port PORT-NUMBER: 49 timeout: 5 seconds retransmit: 2 aaa group server configuration Enable TACACS, XTACACS, TACACS+, or RADIUS authentication method for login and enable access to the switch. The first created authentication method will be the primary one. The maximum number of entries in the list is project CLI Reference Guide 526