D-Link DGS-6600-48T Product Manual - Page 712

DGS-6604 m show ipv6 route show ipv6 route Use this command show ipv6 route to display the active IPv6 routes in the system. show ipv6 route [ IPV6-ADDRESS [ INTERFACE-TYPE INTERFACE-NUMBER | NEXT-HOPADDRESS ] | NETWORK-PREFIX / PREFIX-LENGTH [ INTERFACE-TYPE INTERFACENUMBER | NEXT-HOP-ADDRESS ] | [ database ] PROTOCOL | [ database ] connected | [ database ] static ] Syntax Description NETWORK-PREFIX (Optional) The IPv6 network that is the destination of the static route. PREFIX-LENGTH (Optional) The length of the IPv6 prefix. A decimal value that indicates how many of the high-order contiguous bits of the address comprise the prefix (the network portion of the address). A slash mark must precede the decimal value. IPV6-ADDRESS (Optional) Displays routing information for a specific IPv6 address. PROTOCOL (Optional) The name of a routing protocol, specify a routing protocol, use one of the following keywords: ospf and rip. INTERFACE-TYPE (Optional) Interface type. For more information about supported interface types, use the question mark (?) to access the online help function. INTERFACENUMBER (Optional) Interface number. For more information about the numbering syntax for supported interface types, use the question mark (?) to access the online help function. database (Optional) the routing database is shown and the active route populated in the forwarding database is prefixed with an asterisk. connected (Optional) All connected local interface routes. static (Optional) All static routes. Default Command Mode Usage Guideline None User EXEC or any configuration mode When the system provides forwarding services for IPv6 traffic, it is very important and helpful to check the forwarding/routing table to understand what the current traffic path is in the network. CLI Reference Guide 702