D-Link DGS-6600-48T Product Manual - Page 642

DGS-6604 m show ip interface Use this command to display the information of ip interfaces. show ip interface [INTERFAC E-ID ] [brief] show ip interface Syntax Description INTERFACE-ID (Optional) Interface type and number. It refers to an IP interface, that is VLAN interfaces only. brief (Optional) Displays a summary of the usability status information for each interface. Default Command Mode Usage Guideline Example None User EXEC or any configuration mode An IP interface can be in either the down state or up state. When an interface is in the up state, it can send and receive packets. If an interface is in the down state, the directly connected routing entry is removed from the routing table. Removing the entry allows the switch to use dynamic routing protocols to determine backup routes to the network. If an optional interface type is specified, then information for that specific interface is displayed. This command only supports VLAN interface types. If no optional arguments are specified, then information for all the interfaces is displayed. If the interface hardware is usable, the interface is marked "up." For an interface to be usable, both the interface hardware and line protocol must be up. This example shows how to display the brief format of the show ip interface command. Switch> show ip interface brief Interface IP-Address Status Protocol vlan1 10.90.90.90 up up vlan2 20.1.1.1 up up Total Entires: 2 Switch> CLI Reference Guide 632