D-Link DGS-6600-48T Product Manual - Page 836

DGS-6604 m snmp-server enable traps snmp-server enable traps To enable all Simple Network Management Protocol (SNMP) notification types that are available on the switch, use the snmp-server enable traps command. To disable all available SNMP notifications, use the no form of this command. snmp-server enable traps no snmp-server enable traps Syntax None Default Disabled Command Mode Global configuration Usage Guideline SNMP notifications can be sent as traps or inform requests. This command enables both traps and inform requests for the specified notification types. To specify whether the notifications should be sent as traps or informs, use the snmp-server host traps command. To configure the router to send these SNMP notifications, enter at least one snmp-server enable traps command. When entering the command with no keywords, all notification types are enabled. When entering the command with a keyword, only the notification type related to that keyword is enabled - see "snmp-server enable traps snmp" on page 827. To enable multiple types of notifications, issue a separate snmp-server enable traps command for each notification type and notification option. Example The snmp-server enable traps command is used in conjunction with the snmpserver host command. Use the snmp-server host command to specify which host or hosts receive SNMP notifications. To send notifications, configure at least one snmp-server host command. This example shows how to enable the SNMP traps. Switch(config)# snmp-server enable traps Switch(config)# CLI Reference Guide 826