D-Link DGS-6600-48T Product Manual - Page 40

DGS-6604 m aaa group server aaa group server Use the aaa group server command to enter AAA group server mode and identify AAA server groups used for AAA authentication. In AAA group server mode server hosts are grouped into distinct lists and distinct methods. To remove a group server from the configuration list, use the no aaa group server form of this command. aaa group server GROUP-NAME no aaa group server GROUP-NAME Syntax Description GROUP-NAME Character string used to name the group of servers used for group server method AAA authentication. The group name can be up to 32 characters in length. Default Command Mode Usage Guideline Example There is no aaa group server. Global configuration at privilege level 15 The AAA group server method is defined for AAA authenticatication for user login or configuration. The aaa authentication command is used to define the group server method and specify the AAA server group. Use aaa group server command to enter AAA group server mode. If the group name specified does not exist, the switch creates the new group. Once in AAA group server mode, use the server command to define and configure servers added to the group. The following example shows the network access server configured to recognize two RADIUS host entries. The second host entry configured acts as fail-over backup to the first one. (The RADIUS host entries are tried in the order in which they are configured.) Switch(config)#aaa group server group1 Switch(config-aaa-groug-server)# server radius 172.19.10.100 key 12345678 Switch(config-aaa-group-server)# server radius 172.19.10.200 key 12345678 Switch(config-aaa-group-server)# end Switch# Verify the settings by entering the show aaa group server command. CLI Reference Guide 30