D-Link DGS-6600-48T Product Manual - Page 395

DGS-6604 m lldp tx-delay lldp tx-delay To set the transmission delay timer use the lldp tx-delay command. This delay timer defines the minimum interval between sending of LLDP messages due to constantly change of MIB content. Use the no form of this command to return to the default settings. lldp tx-delay SECONDS no lldp tx-delay Syntax Description SECONDS Specifies a delay for sending successive LLDPDU on an interface; valid values are from 1 to 8192 seconds and should not greater than one-fourth of transmission interval timer Default Command Mode Usage Guideline Example 2 seconds Global configuration The LLDP transmission interval (tx-interval) must be greater than or equal to four times of transmission delay timer. This example shows how to set the transmission delay timer to 8 seconds. Switch(config)# lldp tx-delay 8 The following example configures the transmission delay timer to default value. Switch(config)# no lldp tx-delay CLI Reference Guide 385