Sony MLS-X1 Users Guide - Page 107
Home > M/E-1 > Bus/Transition > DME Wipe >
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
You can set the operation mode for executing a transition when releasing a pattern limit to manual or auto. For details about setting the operation mode, see "Setting the Operation Mode When the Pattern Limit is Released" (page 396). 1 Press the [PTN LIMIT] button in the transition control block/transition control block (simple type). The [PTN LIMIT] button is lit green. 2 Execute a transition. If the operation mode when a pattern limit is released is set to auto Press the [PTN LIMIT] button to execute the remainder of the transition automatically with the preset transition rate. When the transition is completed, the pattern limit is released and the [PTN LIMIT] button turns off. If the operation mode when a pattern limit is released is set to manual Execute the remainder of the transition using one of the following methods. When the transition is completed, the [PTN LIMIT] button turns off. • Press the [CUT] button. The image switches instantaneously and the pattern limit is released. • Press the [AUTO TRANS] button/[TAKE] button. The remainder of the transition is executed with the preset transition rate and the pattern limit is released when execution is completed. • Operate the fader lever. If the fader lever is moved in the execution direction of the transition, the remainder of the transition is executed and the pattern limit is released when execution is completed. If the fader lever is moved in the opposite direction, the transition is executed such that the state before executing the transition is restored, and the pattern limit is released when execution is completed. To set the transition rate when the pattern limit is released This section describes the M/E-1 menu as an example. 1 Open the pattern limit setting menu. When the transition type is a wipe, open the Home > M/E-1 > Bus/Transition > Wipe > Pattern Mix/Edge/ Direction menu (11109.33). When the transition type is a DME wipe, open the Home > M/E-1 > Bus/Transition > DME Wipe > Edge/Direction menu (11109.44). 2 Set the transition rate in the [Pattern Limit Release] group. Auto Trans Rate: Follow the current transition rate. Independ Trans Rate: Set an independent transition rate for releasing a pattern limit. When the [Independ Trans Rate] button is selected, set the following parameter. No. Parameter Adjustment 1 Transition Rate Transition rate when the pattern limit is released 107