Sony MLS-X1 Users Guide - Page 28

a Transition settings/execution buttons (assignable buttons) You can assign functions, such as settings and execution, for transitions in the Home > Setup > Panel > Module > Button Assign menu (19104.21). For details about assigning buttons, see "Assigning Control Panel Buttons" (page 402). Note The functions that can be assigned to the four buttons at the top and the five buttons on the left are different. Transition type selection buttons The following functions can be assigned to both the four buttons at the top and the five buttons on the left. Function Button name name Mix MIX NAM NAM Super Mix SUPER MIX Preset PST Color Mix COLOR MIX Wipe WIPE DME Wipe DME WIPE FM 1&2 FM1&2 Clip to FM CLIP to 15&16 Clip FM15&16 CLIP Description Selects mix. Selects NAM (non-additive mix). Selects super mix. Selects preset color mix. Selects wipe. Selects DME wipe. Selects clip transition. Wipe direction selection buttons The following functions can be assigned to the four buttons at the top only. Function name Reverse Button name REV Normal/ NORM/ Reverse REV Description When not lit, the wipe proceeds in the direction from black to white of the pattern images, shown in "Wipe Pattern List" (page 491), or in the direction of the arrows (normal). When lit, the wipe proceeds in the opposite direction of normal (reverse). The wipe direction alternates between normal and reverse after each transition. Transition/macro execution buttons The following functions can be assigned to the five buttons on the left only. Function name Take Button name TAKE Cut Macro Take CUT MCRO TAKE Description Executes an auto transition with the set transition rate and transition type. During the transition, the button is lit amber. Executes an immediate transition. Executes a macro. Keyframe fader button The following functions can be assigned to both the four buttons at the top and the five buttons on the left. Function name KF Button name KF Description Uses the fader lever as a keyframe fader. Pattern limit setting buttons The following functions can be assigned to the four buttons at the top only. Function name Limit Set Pattern Limit Button name Description LIMIT SET Sets the pattern limit. PTN LIMIT Enables the pattern limit. Main/sub switching buttons (multi program 2 mode) The following functions can be assigned to the four buttons at the top only. Function name Main Button name MAIN Sub SUB Description Switches operation to the function on the main side in multi program 2 mode. Simultaneously pressing the [SUB] button activates both the main and sub operations. Switches operation to the function on the sub side in multi program 2 mode. b Display Displays the transition rate. 28