Sony MLS-X1 Users Guide - Page 376
Setting a Format Converter, Setting the conversion format
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 376 highlights
Setting a Format Converter You can convert the signal format of an output signal. You can use a format converter on odd-numbered outputs. Setting the conversion format You can set the signal format of an output signal to convert by the format converter. Notes • Field frequency and frame frequency conversion is not supported. • Ancillary data is deleted if a conversion format is configured that is different from the system format. The signal formats that can be converted are given below. System signal format (frequency) 2160P 2SI (59.94, 50) 1080P (59.94, 50) 1080i (59.94, 50) Signal format of output signal 1080i 1080P 2160P 2SI 720P 1080i 1080P 720P 1080i 1 Open the Home > Setup > System > Output > FC Format menu (19101.44). 2 Select a tab to switch the target to set. [Output] tab: Output converter format settings [Dedicated Out] tab: Dedicated output converter format settings 3 Select the target output to set. To select and set multiple outputs, place a check mark beside the target outputs to set. To select and set all outputs, place a check mark in the Select All checkbox. 4 Press the [FC Format] button and select an output signal format from the pull-down list. Setting an HDR Converter You can set the output signal OETF, color space, and HDR converter for outputs that have color corrector/HDR converter enabled. For details about each HDR conversion item, see "Setting HDR" (page 366). For details about outputs that can be configured with a color corrector/HDR converter, see "Selecting Outputs Configurable with a Color Corrector/HDR Converter" (page 374). Note To use the HDR converter function, the MZS-X1750 HDR Converter License (option) is required for each target box. 1 Open the Home > Setup > System > Output > HDR Converter menu (19101.46). The system OETF, color space, and HDR settings are displayed in [System Settings]. 2 Select a tab to switch the target to set. [Output] tab: Output HDR converter settings [Dedicated Out] tab: Dedicated output HDR converter settings 3 Select the target output to set. To select and set multiple outputs, place a check mark beside the target outputs to set. To select and set all outputs, place a check mark in the Select All checkbox. 4 Press the [Output Signal OETF] button and select an OETF from the pull-down list. Select [SDR], [HLG], [PQ], [S-Log3 (HDR)], or [S-Log3 (Live HDR)]. 5 Press the [Color] button and select a color space from the pull-down list. Select [BT.709] or [BT.2020]. 6 Enable/disable the system settings using the [Follow System Settings] switch. On: Enable system settings. Apply the system settings to the output signal. Off: Disable system settings. Apply different settings than the system settings to the output signal. If the system settings are disabled, press the [Adjust Details] button and configure the HDR conversion settings in the [HDR Converter] window. Note When multiple outputs are selected, the [Follow System Settings] switch settings do not change in unison. 376