Sony MLS-X1 Users Guide - Page 27
Transition Control Block Simple Type, Independent key transition execution
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
d Independent key transition execution section Display Independent key transition execution buttons Independent key transition execution buttons (assignable buttons) You can assign execution buttons for independent key transitions in the Home > Setup > Panel > Module > Button Assign menu (19104.21). For details about assigning buttons, see "Assigning Control Panel Buttons" (page 402). Function name Key 1 Transition to Key 8 Transition Button name KEY1 ON to KEY8 ON AUTO TRANS Description Inserts or removes a key instantaneously. If a key is currently inserted, the button is lit amber. Inserts or removes a key automatically with the set transition rate and transition type. During the transition, the button is lit amber. Note The [KEYx ON] button (x = 1 to 8) and the [AUTO TRANS] button for the same key are assigned as a set. Display Displays the following information for each key assigned to an independent key transition execution button. • Key content name (key source name when a key source is selected on a cross-point control block key bus) • Currently used DME channel or resizer • Transition rate • Transition type For details about the content name display of keys, see "Setting Logical V/K Pair Names/Source Names and Destination Names" (page 416) and "Setting a Logical V/K Pair" (page 381). Transition Control Block (Simple Type) The simple-type transition control block is used to execute background transitions. a For details, see "Chapter 5 Transitions" (page 94). a b a c 27