Sony MLS-X1 Users Guide - Page 200

Button SRC TRGT ASP PERS LOC SIZE LOC XYZ ROT SHIFT CLR WORK BUFR AXIS LOC Description Enable source space operations. Cannot be selected at the same time as the [TRGT] button. Enable target space operations. Cannot be selected at the same time as the [SRC] button. • When the [ASP PERS] button is pressed in source space: Adjusts the aspect ratio of an image in the X-axis or Y-axis direction using the trackball, or in both the X-axis and Y-axis directions simultaneously using the Z-ring. • When the [ASP PERS] button is pressed while pressing the [SHIFT] button in source space: Adjusts the skew of an image in the X-axis or Y-axis direction using the trackball. • When the [ASP PERS] button is pressed in target space: Adjusts the viewpoint position (perspective of an image) in the X-axis or Y-axis direction using the trackball. Adjusts the distance from the viewpoint position using the Z-ring. Moves an image in the X-axis or Y-axis direction using the trackball. Scales an image (shrink/magnify) using the Z-ring. Moves an image in the X-axis or Y-axis direction using the trackball, and in the Z-axis direction using the Z-ring. • When the [ROT] button is pressed: Rotates an image around the X-axis or Y-axis using the trackball, and around the Z-axis using the Z-ring. • When the [ROT] button is pressed while pressing the [SHIFT] button: Rotates the image in spin mode. Used in combination with the [ASP PERS], [ROT], [CTR], and [CLR WORK BUFR] buttons. • When the [CLR WORK BUFR] button is pressed once: Returns the three-dimensional transform parameters to the initial settings. • When the [CLR WORK BUFR] button is pressed twice, or the [CLR WORK BUFR] button is pressed once while pressing the [SHIFT] button: Returns all DME parameters to the initial settings. Moves the rotation axis of an image in the X-axis or Y-axis direction using the trackball, and in the Z-axis direction using the Z-ring. Button X Y Z FINE CTR Description Restricts the parameters targeted by the operation. You can select multiple buttons. When the [X] button is lit: Operations on parameters on the X-axis using the trackball are enabled. When the [Y] button is lit: Operations on parameters on the Y-axis using the trackball are enabled. When the [Z] button is lit: Operations on parameters on the Z-axis (Z-ring adjustment items) using the Z-ring are enabled. Switches to fine mode, enabling fine adjustment control of setting values using the trackball and Z-ring. • When the [CTR] button is pressed once: Adjusts the three-dimensional transform parameters to the detent positions. • When the [CTR] button is pressed twice, or the [CTR] button is pressed once while pressing the [SHIFT] button: Returns the three-dimensional transform parameters to the default values. Trackball and Z-ring operations Operation in the X-axis direction: Turn the trackball horizontally. Parameter values increase as you turn to the right, and decrease as you turn to the left. Operation in the Y-axis direction: Turn the trackball vertically. Parameter values increase as you turn upward, and decrease as you turn downward. Operation in the Z-axis direction: Turn the Z-ring. Parameter values increase as you turn clockwise, and decrease as you turn counterclockwise. However, if you have pressed the [LOC XYZ] button or [AXIS LOC] button, the parameter values decrease as 200