Sony MLS-X1 Users Guide - Page 271

For details about path types, see "Path types" (page 270). When [Spline] is selected, set the following parameters. No. Parameter 1 Tension 2 Bias 3 Continuity Adjustment Tension Bias Continuity Note When the path type for a curve (Curve) is set to [Off], the cross-point hold (Xpt Hold) and hue (Hue) settings are disabled. When the path type for a curve (Curve) is set to [Step], the hue (Hue) setting is disabled. Executing an Effect Timeline You can execute an effect timeline using the utility/ shotbox control block, utility control block, or in the menu. You can also recall a shotbox register with a registered effect timeline region and register in the Flexi Pad control block to execute an effect timeline. For details, see "Executing a Shotbox (Flexi Pad Control Block)" (page 298). Note You can also operate an effect timeline manually using the keyframe fader in the transition control block/ transition control block (simple type) or the Z-ring in the device control block. Executing an Effect Timeline (Utility/Shotbox Control Block) You can select a region and recall an effect timeline register using the numeric keypad control block or the menu. For details about recall operations using the numeric keypad control block, see "Recalling an Effect Timeline" (page 256). For details about recall operations using the menu, see "Recalling an Effect Timeline" (page 262). You can also select a region and recall an effect timeline register by recalling a shotbox register in the utility/ shotbox control block. For details, see "Executing a Shotbox (Utility/Shotbox Control Block)" (page 298) and "Assigning a Utility Function" (page 405). Executing an effect timeline Press the [RUN] button. The [RUN] button is lit amber and the effect timeline is executed. When stopped by a pause, the [RUN] button is lit green. Press the [RUN] button, lighting it amber, to resume effect timeline execution. 271