Sony MLS-X1 Users Guide - Page 213

Global Effects Overview Global effects are effects created by combining multiple consecutive DME channels. The following global effects can be configured. • Combiner • Brick • Shadow Setting a Combiner Images selected on multiple DME channels can be combined automatically. You can set the order of priority (1 to 4) for combining images from up to four channels. The selected channels (Ch1 to Ch4) are assigned to combiners 1 and 2 as follows. Channel Ch1 + Ch2 Ch2 + Ch3 Ch3 + Ch4 Ch1 + Ch2, Ch3 + Ch4 Ch1 + Ch2 + Ch3 Ch2 + Ch3 + Ch4 Ch1 + Ch2 + Ch3 + Ch4 Combiner 1 Ch1, Ch2 Ch2, Ch3 Ch3, Ch4 Ch1, Ch2 Ch1, Ch2, Ch3 Ch2, Ch3, Ch4 Ch1, Ch2, Ch3, Ch4 Combiner 2 - - - Ch3, Ch4 - - - 1 Open the Home > DME > Global Effect > Combiner Priority menu (15109.11). 2 In the [Combiner 1 Priority] group, set the priority order. When combining two channels Set the channel buttons to the on state using [Priority 1] and [Priority 2]. When combining three channels Set the channel buttons to the on state using [Priority 1] to [Priority 3]. When combining four channels Set the channel buttons to the on state using [Priority 1] to [Priority 4]. When combining Ch1 + Ch2 and Ch3 + Ch4 In the [Combiner 1 Priority] group, set the priority order for channels 1 and 2. In the [Combiner 2 Priority] group, set the priority order for channels 3 and 4. Setting a Brick Images selected on three DME channels can be combined into a brick shape. The selected channels (Ch1 to Ch4) are assigned to the surfaces of the brick as follows. Channel Top side Ch1 + Ch2 + Ch3 Ch1 Ch2 + Ch3 + Ch4 Ch2 Side V Ch2 Ch3 Side H Ch3 Ch4 Note When the system signal format is 2160P, Brick cannot be set. 1 Open the Home > DME > Global Effect > Brick menu (15109.21). 2 Set the [Brick] button to the on state and set the following parameters. No. Parameter Adjustment 1 Height Height of brick 2 Front Overlap Front overlap 3 Side H Overlap Side H overlap 4 Side V Overlap Side V overlap 3 In the [Side H] group, select how to fit the image on side H. Crop: Crop the parts that do not fit into the side without shrinking the picture. Compress: Reduce the image to fit. When the [Crop] button is selected, set the following parameters. The position of the image set by the parameters is the top left of side H. The bottom right is set automatically. No. Parameter 1 H 2 V Adjustment Position of left edge Position of top edge When the [Compress] button is selected, set the following parameters. The image with ranges set by the parameters is enlarged/reduced to match the size of side H. 213