Sony MLS-X1 Users Guide - Page 42

Bank selection buttons Function name Bank 1 to Bank 20 Button name BANK1 to BANK20 Description Switches the memory recall section to function recall mode of the selected bank. AUX Bus Control Block The AUX bus control block is used for selecting signals used on buses, for router operations, and other tasks. b Memory recall section (memory recall buttons) This section displays the functions assigned to the buttons for the selected operation mode. Note When using two utility/shotbox control blocks, the memory recall button settings are common to both. The AUX bus control block has two modes: AUX bus operation mode and router operation mode. To switch to router operation mode, press the [RTR MODE] button, turning it on, in the cross-point pad. a 1st row 2nd row b c 3rd row 4th row a a Button rows The 1st row and 2nd row are used as delegation button rows, and the 3rd row and 4th row are used as cross-point button rows. AUX bus operation mode Uses the 1st row and 2nd row delegation buttons to select buses, and the 3rd row and 4th row cross-point buttons to select signals. For details, see "Chapter 4 Selecting Signals" (page 81). d Name 1st row 2nd row Description • When second delegation mode is enabled, selects the bus to assign to the 3rd row. • When second delegation mode is disabled, selects the bus (bus in unshifted state of delegation buttons) to assign to the 3rd row and 4th row. You can select the bus in the shifted state while pressing the shift button. • When second delegation mode is enabled, selects the bus to assign to the 4th row. • When second delegation mode is disabled, selects the bus (bus in shifted state of delegation buttons) to assign to the 3rd row and 4th row. 42