Sony MLS-X1 Users Guide - Page 36

Channel selection buttons Function name Channel 1 to Channel 12 K1 Resizer to K8 Resizer FM 1 Clip to FM 16 Clip Clip Player 1 to Clip Player 4 Button name CH1 to CH12 K1RSZ to K8RSZ FM1 CLIP to FM16 CLIP CLIP1 to CLIP4 Description CH1 to CH4: Selects the target DME channel in three-dimensional transform operation mode. CH1 to CH12: Selects the target device in device/frame memory/clip player operation mode. Selects the target resizer in resizer operation mode. Selects the target frame memory output channel in device/frame memory/clip player operation mode. Selects the target clip player output channel in device/ frame memory/clip player operation mode. Notes • When multiple channels are selected, the first selected button becomes the reference, and is lit green. Subsequent selected buttons are lit amber. • [CH1] to [CH8] and [K1RSZ] to [K8RSZ] share the same buttons. b Operation buttons (assignable buttons) You can assign buttons for use in each operation mode in the Home > Setup > Panel > Module > Button Assign menu (19104.21). For details about assigning buttons, see "Assigning Control Panel Buttons" (page 402). Resizer operation mode This mode is used for two-dimensional transform operations on images using a resizer. For details about resizer operations, see "Resizer" (page 137). Function Button name name Description Aspect/ ASP PERS Adjusts the aspect ratio of a key Perspective using the trackball or Z-ring. Location Size LOC SIZE • Moves a key using the trackball. • Scales a key (shrink/magnify) using the Z-ring. Rotation ROT • Rotates a key using the trackball. • Adjusts the perspective of a key using the Z-ring. Function name Shift Button name SHIFT Clear Work CLR Buffer WORK BUFR Resizer On RSZR ON X X Y Y Z Z Fine FINE M/E Default Recall M/E DEF RCALL Description Used in combination with the [CTR], [CLR WORK BUFR], and [BDR/CROP] buttons. • When the [CLR WORK BUFR] button is pressed once: Returns the two-dimensional transform parameters to the initial settings. • When the [CLR WORK BUFR] button is pressed twice, or the [CLR WORK BUFR] button is pressed once while pressing the [SHIFT] button: Returns all resizer parameters to the initial settings. Enables/disables the selected resizer. • Restricts the parameters targeted by the operation. When the [X] button is lit: Operations on parameters on the X-axis using the trackball are enabled. When the [Y] button is lit: Operations on parameters on the Y-axis using the trackball are enabled. When the [Z] button is lit: Operations on parameters on the Z-axis (Z-ring adjustment items) using the Z-ring are enabled. • When the [ROT] button is lit, the [X] button and [Y] button select the direction of rotation. • When the [BDR/CROP] button is lit green, the [X] button, [Y] button, and [Z] button select the edge (top edge, left edge, right edge) to crop. • When the [X] button, [Y] button, and [Z] button are lit green, you can enter parameter settings using the numeric keypad control block. Switches to fine mode, enabling fine adjustment control of setting values using the trackball and Z-ring. When the [M/E DEF RCALL] button is pressed twice: Returns the switcher bank to the initial settings. 36