Sony MLS-X1 Users Guide - Page 371
HDR Converter] window > [Config] tab, For a Sony system camera input signal
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 371 highlights
3 Press the [Input Signal OETF] button and select an OETF from the pull-down list. Select [SDR], [HLG], [PQ], [S-Log3 (HDR)], or [SLog3 (Live HDR)]. 4 Press the [Color] button and select a color space from the pull-down list. Select [BT.709] or [BT.2020]. 5 Enable/disable the system settings using the [Follow System Settings] switch. On: Enable system settings. Apply the system settings to the input signal. Off: Disable system settings. Apply different settings than the system settings to the input signal. If the system settings are disabled, press the [Adjust Details] button and configure the HDR conversion settings in the [HDR Converter] window. Note When multiple inputs are selected, the [Follow System Settings] switch settings do not change in unison. [HDR Converter] window > [Config] tab Sets the HDR conversion mode. 1 In the [Conversion Mode] group, select a conversion mode. Select [AIR Matching On], [AIR Matching Off], or [Display Referred]. 2 Press the [HDR Look] button and select a type of look from the pull-down list. Select [Live], [Mild], or [Natural]. Notes • When the input signal OETF is set to [PQ], [S-Log3 (HDR)], or [S-Log3 (Live HDR)], [Natural] cannot be selected. • This cannot be set when the input signal OETF is set to [SDR]. • This cannot be set when the [Look Conversion] button is set to the on state on the [Additional Paint] tab. 3 Enable/disable the black compression function using the [HDR Black Comp.] button. Note This cannot be set when the [Look Conversion] button is set to the on state on the [Additional Paint] tab. 4 In the [Black Level] group, set the black level. For a Sony system camera input signal Press the [Sony System Camera] button. Press the [Master Black (Abs.)] button and enter a master black value in the numeric keypad window. Press the [HDR Black Offset] button and enter an HDR black offset in the numeric keypad window. For a non-Sony system camera input signal Press the [Others] button. Press the [Master Black (HDR)] button and enter an HDR black level in the numeric keypad window. Press the [Master Black (SDR)] button and enter an SDR black level in the numeric keypad window. Notes • When the system OETF and input signal OETF are set to [SDR], [Black Level (HDR)] cannot be set. • When the system OETF and input signal OETF are set to [HLG], [PQ], [S-Log3 (HDR)], or [S-Log3 (Live HDR)], [Black Level (SDR)] cannot be set. [HDR Converter] window > [Conversion] tab Sets the mode for conversion from HDR to HDR, SDR to HDR, or HDR to SDR. Note This cannot be set when the system OETF and input signal OETF are set to [SDR]. When converting from HDR to HDR Enable/disable the black clip function using the [HDR Black Clip] button. On: Enable the black clip function. Off: Disable the black clip function. Note This cannot be set when the system OETF is set to [S-Log3 (HDR)] or [S-Log3 (Live HDR)]. When converting from SDR to HDR 1 Enable/disable the highlight creation function using the [Highlight Creation] button. On: Enable the highlight creation function. Press the [Point (Abs.)] button and select a knee point position for the curve from the pull-down 371