Sony MLS-X1 Users Guide - Page 239

• When a preset color mix is selected on main or sub, it is not possible to perform an independent key transition operation on main and sub. AUX Bus Functions Selecting an AUX Bus/Edit Preview Bus Signal You can select and switch AUX bus and edit preview bus signals using the menu. From the list of cross-point button numbers, select the button number assigned with a signal. Note In a multiple-box switcher configuration, signals other than those sent to the cross-point box cannot be selected on the AUX bus. For details about sending to the cross-point box, see "Setting Re-Entry Signals" (page 398). 1 Open the Home > Other Effects > Aux Bus > Aux Xpt menu (18102.11). 2 Select the target bus for operation. 3 Press the [Edit] button. A signal selection window for the selected bus appears. 4 Select a video signal or key signal in [Select Source Type]. To select a video signal, set the [Video] radio button to the on state. To select a key signal, set the [Key] radio button to the on state. 5 Switch the signal using the cross-point selection buttons. Select a tab to change the button number to display. Setting a cross-point selection button to the on state switches the cross-point. AUX Mix In addition to a switcher bank transition, you can also perform a transition between two AUX buses. Assigning AUX buses to outputs for an AUX mix Assign two AUX buses used for an AUX mix to consecutive odd-numbered and even-numbered outputs. 239