Sony MLS-X1 Users Guide - Page 34
Independent key transition execution
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
a Key delegation buttons There are four key delegation buttons (1 to 4) in the order top left, top right, bottom left, and bottom right. You can assign keys of any switcher banks (M/E-1 to M/E-5, P/P) in the Home > Setup > Panel > Module > Button Assign menu (19104.21). For details about assigning buttons, see "Assigning Control Panel Buttons" (page 402). b Independent key transition execution section KEY ON buttons Fader lever Transition indicator AUTO TRANS buttons Name Fader lever Transition indicator [KEY ON] button [AUTO TRANS] button Description Move this up or down to execute a transition. Displays the transition progress using LEDs. Inserts or removes a key instantaneously. When a key is currently inserted, the button is lit amber. Inserts or removes a key automatically with the set transition rate and transition type. During the transition, the button is lit amber. Note The four [KEY ON] buttons and [AUTO TRANS] buttons correspond to the keys assigned to key delegation buttons 1 to 4. The [KEY ON] button label indicates the key assigned to the key delegation button. c Independent key transition type selection buttons Button name MIX WIPE Description Selects mix. Selects wipe. Button name DME WIPE CUT SHIFT Description Selects DME wipe. Selects cut. Use when setting transitions separately for key insertion and removal. d Key snapshot operation buttons Button name K-SS 1 to K-SS 4 K-SS K-SS STORE UNDO Description Selects key snapshot register 1 to 4. Switches to key snapshot operation mode. Saves a key snapshot in the selected register when a [K-SS 1] to [K-SS 4] button is pressed while pressing the [K-SS STORE] button. Undoes a key snapshot recall if pressed immediately after the recall. e Display Displays the following information for each key assigned to a key delegation button. • Key content name (key source name when a key source is selected on a cross-point control block key bus) • Currently used DME channel or resizer • Transition rate • Transition type • Register name (in key snapshot operation mode). For details about the content name display of keys, see "Setting Logical V/K Pair Names/Source Names and Destination Names" (page 416) and "Setting a Logical V/K Pair" (page 381). 34