Sony MLS-X1 Users Guide - Page 128
Key Edges, Setting Key Edges Menu
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
2 Select content to unload. To select and unload multiple content, place a check mark beside the target content to unload. To select and unload all content, place a check mark in the Select All checkbox. 3 Press the [Unload from Memory] button. To unload currently recalled content Place a check mark in [Forcibly unload recalled contents]. 4 Check the message, then press [OK]. Recalling key fill/key source content You can recall content for selection as a key fill/key source for SL keys. 1 Open the Home > M/E-1 > Key5 > SL Key > Recall menu (11105.63). Content can be displayed in list view or thumbnail view. 2 Select content to recall. The content is recalled and selected as a key fill/key source. The key fill thumbnail, key source thumbnail, and content name are shown on the left. "No Thumbnail" is displayed if there are no thumbnails. To lock the recall state of content Set the [Lock] switch to the on state. The content recalled on an SL key is locked and the key fill/key source selection is fixed. When locked, content recalled on an SL key cannot be unloaded. Key Edges When edge type is selected, you can add modifiers, such as a border, to the key. Setting Key Edges (Menu) This section describes the M/E-1 key 1 menu as an example. Setting the edge type 1 Open the Home > M/E-1 > Key1 > Edge > Edge Type Select menu (11101.21). 2 In the [Edge] group, select an edge type. Normal: Normal Border: Border Drop Border: Drop border Shadow: Shadow Outline: Outline Emboss: Emboss When the [Border] button or [Outline] button is selected, set the following parameters. No. Parameter 1 Width 3 Density Adjustment Width Density When the [Drop Border] button, [Shadow] button, or [Emboss] button is selected, set the following parameters. No. Parameter 1 Width 2 Position 3 Density Adjustment Width Position Density When the [Normal] button is selected, the subsequent setup is not required. Note The [Density] parameter for an emboss and the [Density] parameter for the key can be adjusted separately. When the [Density] parameter for the key is set to 0.00, the key edge has the density set for the emboss. For details about the [Density] parameter for a key, see "Setting the key type" (page 118). 128