Sony MLS-X1 Users Guide - Page 87

Selecting a Bus (AUX Bus Control Block) The cross-point button rows in an AUX bus control block (AUX bus operation mode) are shared by multiple buses. Buses are assigned to the cross-point button rows for use. Operation Mode of a Button Row The button rows in an AUX bus control block may have different operation modes depending on whether second delegation mode is enabled/disabled. Second delegation mode is disabled by default. To enable, press the [2ND DELG] button, turning it on, in the cross-point pad. When second delegation mode is enabled The 1st row and 2nd row are used as delegation button rows. The bus to assign to the 3rd row is selected in the 1st row, and the bus to assign to the 4th row is selected in the 2nd row. The 3rd row is used as a cross-point button row for the bus selected in the 1st row. The 4th row is used as a crosspoint button row for the bus selected in the 2nd row. When second delegation mode is disabled The 1st row and 2nd row are used as delegation button rows. The bus in the unshifted state is selected in the 1st row, and the bus in the shifted state is selected in the 2nd row. The 3rd row and 4th row are used as cross-point button rows for the bus selected in the 1st row/2nd row. The signal in the unshifted state is selected in the 3rd row, and the signal in the shifted state is selected in the 4th row. Note When second delegation is disabled, the 1st row and 3rd row shift buttons are set to hold mode (fixed). You can select the button number in the shifted state while pressing the shift button. The 2nd row and 4th row are always in the shifted state, hence the shift buttons cannot be operated. Bus Types and Assignments You can select buses using the delegation buttons for assignment to the 3rd row/4th row cross-point button rows. The assignable buses and assignment operation are as follows. Notes • You can assign delegation buttons to the 1st row/2nd row. For details about assigning buttons, see "Setting a delegation button row" (page 409). • When using an SL key, key bus operation is disabled. For details about SL keys, see "SL Key" (page 117). Bus Assignment operation Key 1 fill bus to key 8 fill bus Press the following buttons in the 1st row/2nd row, turning them on. • [M/Ex KEY1 V] to [M/Ex KEY8 V] buttons (x = 1 to 5) • [P/P KEY1 V] to [P/P KEY8 V] buttons Key 1 source bus to key 8 source bus Press the following buttons in the 1st row/2nd row, turning them on. • [M/Ex KEY1 K] to [M/Ex KEY8 K] buttons (x = 1 to 5) • [P/P KEY1 K] to [P/P KEY8 K] buttons Utility 1 bus Utility 2 bus Press the following buttons in the 1st row/2nd row, turning them on. • [M/Ex UTIL1], [M/Ex UTIL2] buttons (x = 1 to 5) • [P/P UTIL1], [P/P UTIL2] buttons Utility 2 bus (sub) a) Press the following buttons in the 1st row/2nd row, turning them on. • [M/Ex SUB UTIL2] button (x = 1 to 5) • [P/P SUB UTIL2] button DME external video Press the following buttons in the 1st bus row/2nd row, turning them on. • [M/Ex DME EXT] button (x = 1 to 5) • [P/P DME EXT] button DME utility 1 bus DME utility 2 bus Press the [DME UTIL1] and [DME UTIL2] buttons in the 1st row/2nd row, turning them on. Edit preview bus Press the [EDIT PVW] button in the 1st row/2nd row, turning it on. AUX1 bus to AUX48 bus Press the [AUX1] to [AUX48] buttons in the 1st row/2nd row, turning them on. Frame memory source 1 bus Frame memory source 2 bus Press the [FMS1] and [FMS2] buttons in the 1st row/2nd row, turning them on. DME1 video bus to Press the [DME1V] to [DME4V] DME4 video bus buttons in the 1st row/2nd row, turning them on. 87