Sony MLS-X1 Users Guide - Page 260
Setting the Duration and Delay, Setting keyframe loop, Undoing an edit operation
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 260 highlights
2 Press the [PAUSE] button, turning it on orange. A pause is set at the selected keyframe. Setting keyframe loop You can specify a range on an effect timeline to execute the range repeatedly. A loop can be configured at only one location on an effect timeline. 1 Select the first edit point (keyframe) for a loop range. 2 Press the [KF LOOP] button, turning it on orange. "FROM XXX TO" ("XXX" is the current keyframe number) is displayed on the display in the numeric keypad control block. Note During loop configuration operations in the numeric keypad control block, the [KF LOOP] button is lit blue. 3 Enter the number of the last keyframe for the loop range in the numeric keypad area in the numeric keypad control block. To change the number of the first keyframe in the loop range, press the [CLR] button. Enter the number of the first keyframe, press the [ENTER] button, and then enter the number of the last keyframe. When the number of the last keyframe is entered and you press the [ENTER] button, "COUNT" is displayed on the display in the numeric keypad control block. 4 Enter the number of loop repetitions (1 to 99, or 0) in the numeric keypad area in the numeric keypad control block. If "0" is entered, an infinite loop is specified. 5 Press the [ENTER] button. The loop range and number of repetitions are applied. Notes • The loop between the specified first keyframe and last keyframe is maintained even if a keyframe is inserted/deleted within the loop range. • If the first keyframe or last keyframe of the loop range is deleted, the loop is cleared. Undoing an edit operation To undo an operation immediately after inserting, modifying, deleting, or pasting a keyframe, press the [UNDO] button. Setting the Duration and Delay You can set the effect duration, keyframe duration, and delay to adjust the execution time of an effect timeline. For details, see "Duration and Delay" (page 252). Select the target region to set and an effect timeline register, and set the duration mode, duration, and delay. After configuration, save the effect timeline. For details about recalling an effect timeline register, see "Recalling an Effect Timeline" (page 256). For details about saving an effect timeline, see "Saving an Effect Timeline" (page 257). You can configure duration and delay by switching the utility/shotbox control block to effect timeline/macro edit mode. Setting the duration mode 1 Press the [KF MCRO EDIT] button. The memory recall section switches to effect timeline/macro edit mode. 2 Press the [EDIT ENBL] button, turning it on orange. 3 Set the duration mode using the [CONST DUR] button. Lit orange: Set to constant duration mode. Lit dark blue: Set to variable duration mode. Setting the effect duration 1 Press the [KF MCRO EDIT] button. The memory recall section switches to effect timeline/macro edit mode. 2 Press the [EDIT ENBL] button, turning it on orange. 3 Press the [EFF DUR] button. "DUR XXX:XX:XX" ("XXX:XX:XX" is the current effect duration) is displayed on the display in the numeric keypad control block. 260