Sony MLS-X1 Users Guide - Page 244
Angle, Speed, To replicate a pattern Multi
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
No. Parameter 2 Soft 5 Pattern Adjustment Softness of the pattern contour Pattern number a) a) Linked to the pattern number selected using the [Mix Pattern Select] button. 3 Press the [Mix Pattern Select] button. A pattern selection window appears. 4 Set the button for the target pattern to the on state. Note Dedicated patterns 1 to 24 are the same as standard wipe patterns 1 to 24. 5 Press [OK]. 6 Press the [Color 1] button and set color 1 using the following parameters. No. Parameter 1 Luminance 2 Saturation 3 Hue Adjustment Luminance Saturation Hue Note The [Color 1] button parameters are common to the [Flat Color] buttons in the [Matte] group. 7 Press the [Color 2] button and set color 2 using the following parameters. No. Parameter 1 Luminance 2 Saturation 3 Hue Adjustment Luminance Saturation Hue To swap color 1 and color 2 in a color mix Set the [Color Invert] button to the on state. To set the pattern position (Position) Set the [Position] button to the on state and set the following parameters. No. Parameter 1 Position H 2 Position V Adjustment Horizontal position • Negative values move left. • Positive values move right. Vertical position • Negative values move down. • Positive values move up. To replicate a pattern (Multi) You can replicate a pattern horizontally, vertically, or both up to 63 times. For details about pattern layouts, see "Replicating a wipe pattern (Multi)" (page 159). Set the [Multi] button to the on state and set the following parameters. No. Parameter 1 H Multi 2 V Multi 3 Invert Type Adjustment Number of repetitions of pattern horizontally Number of repetitions of pattern vertically Pattern layout (1 to 4) To set the aspect ratio of a pattern (Aspect) Set the [Aspect] button to the on state and set the following parameter. No. Parameter 1 Aspect Adjustment Aspect ratio • Negative values expand vertically. • Positive values expand horizontally. To rotate a pattern (Rotation) In the [Rotation] group, select a rotation type. Angle: Incline a pattern at a fixed angle. Speed: Rotate a pattern at a fixed speed. When the [Angle] button is selected, set the following parameter. No. Parameter 1 Angle Adjustment Inclination angle of pattern • A value of -100.00 corresponds to a rotation of one turn counterclockwise. • A value of +100.00 corresponds to a rotation of one turn clockwise. • A value of 0.00 corresponds to no rotation. When the [Speed] button is selected, set the following parameter. No. Parameter 1 Speed Adjustment Rotation speed of pattern • A value of -100.00 corresponds to 1 revolution/second counterclockwise rotation. • A value of +100.00 corresponds to 1 revolution/ second clockwise rotation. • A value of 0.00 corresponds to no rotation (stationary). 244