Sony MLS-X1 Users Guide - Page 368
Setting the Input Signal, Setting a Source Name, Selecting Inputs Configurable
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 368 highlights
5 Enable/disable the white clip function using the [White Clip] button. On: Enable the white clip function. Press the button on the right of the [White Clip] button and enter a video signal level in the numeric keypad window. Off: Disable the white clip function. 6 Press the [SDR Gain (dB)] button and enter a gain in the numeric keypad window. 7 In the [Gamma (Table)] group, select a type of gamma curve. Standard: Use standard. Press the button on the right of the [Standard] button and enter a table number (1 to 7) in the numeric keypad window. Press the [Step] button and enter a gamma strength (step) in the numeric keypad window. The effect changes in increments of 0.05. Press the [Level] button and enter a gamma strength (level) in the numeric keypad window. Hyper: Use hypergamma. Press the button on the right of the [Hyper] button and enter a table number (1 to 4) in the numeric keypad window. Setting the Input Signal This section describes how to set the switcher input signal. The number of switcher inputs, number of configurable format converters, and number of configurable color correctors/HDR converters will vary depending on the signal format and the number of boxes. For details about the number of inputs and the number that can be configured, see "Number of Switcher Resources" (page 501). For details about input numbers, see "Input/Output Numbers" (page 503). Setting a Source Name You can set the source name of an input signal. 1 Open the Home > Setup > System > Input > Input Adjust menu (19101.31). 2 Select the target input to set. To select and set multiple inputs, place a check mark beside the target inputs to set. To select and set all inputs, place a check mark in the Select All checkbox. 3 Press the [Source Name] button and enter a source name (up to 16 characters) using the keyboard. Note When multiple inputs are selected, consecutively numbered source names are set. For details, see "Name settings when multiple items are selected" (page 78). Selecting Inputs Configurable with a Color Corrector/HDR Converter You can set inputs that can be configured with a color corrector/HDR converter. Note A color corrector/HDR converter can be configured only for inputs 1 and multiples of 4 + 1 (1, 5, 9, and so on). 1 Open the Home > Setup > System > Input > Input Adjust menu (19101.31). 368