Sony MLS-X1 Users Guide - Page 394
Setting the Transition Mode, Setting the Preset Color Mix Mode
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 394 highlights
Setting the Transition Mode Setting the Transition Preview Mode You can set the transition preview mode for when the [TRANS PVW] button is pressed. 1 Open the Home > Setup > Switcher > Custom > Transition menu (19103.41). 2 Select the target switcher bank to set. 3 Press the [Transition Preview] button and select a transition preview mode from the pull-down list. One Time: One-time mode The transition preview ends after a single transition ends. Normal: Normal mode Pressing the [TRANS PVW] button switches between setting and releasing transition preview mode. When [Normal] is selected, you can set the operation mode of the [TRANS PVW] button. For details about setting the operation mode, see "Setting the operation mode of the [TRANS PVW] button in the transition control block" (page 418). Setting the Independent Key Transition Mode 1 Open the Home > Setup > Switcher > Custom > Transition menu (19103.41). 2 Select the target switcher bank to set. 3 Press the [Key Transition] button and select an independent key transition mode from the pull-down list. Same: The transition settings for key insertion (on) and key removal (off) are common. Independent: Transitions can be configured separately for key insertion (on) and key removal (off). Setting Flip-Flop Mode You can enable/disable flip-flop mode. When disabled, bus fixed mode is selected. 1 Open the Home > Setup > Switcher > Custom > Transition menu (19103.41). 2 Select the target switcher bank to set. 3 Enable/disable using the [Bus Toggle] switch. On: Flip-flop mode Off: Bus fixed mode Setting the Preset Color Mix Mode 1 Open the Home > Setup > Switcher > Custom > Preset Color Mix menu (19103.42). 2 Select the target switcher bank to set. 3 Press the [Stroke Mode] button and select a stroke mode from the pull-down list. Normal: Normal mode Execute a preset color mix with two transition operations. Single: Single mode Execute a preset color mix with one transition operation. Note In bus fixed mode, single mode (fixed) is selected. 4 Press the [Edit] button for [Non Drop Key]. The [Set Non Drop Key] window appears. 5 Place a check mark in the keys to keep their insertion status. You can select multiple keys. 6 Press [OK]. 7 Enable/disable one-time mode using the [One Time Enable] switch. On: Return to previous transition type after a transition ends. Off: Maintain a preset color mix after a transition ends. Enabling/Disabling Split Faders You can enable/disable split faders on the simple-type transition control block. 394