Sony MLS-X1 Users Guide - Page 409
Setting Buttons and Indicators, Setting the Display, Setting a delegation button row
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 409 highlights
Setting a delegation button row You can assign bus delegation buttons to the delegation button rows (1st row/2nd row) in an AUX bus control block. 1 Open the Home > Setup > Panel > Xpt Module > Key Deleg/AUX Assign menu (19104.33). 2 Select the [AUX] tab. A list of delegation buttons is shown on the left and a list of assignable buses is shown on the right. 3 In the list on the left, select the target button number to set. 4 In the list on the right, select a bus to assign. 5 Press the [Set] button. To inhibit operation Select the target button number and set the [AUX Deleg Inhibit] button to the on state. To return the assignment to the defaults Press the [Default Recall] button, check the message, then press [OK]. Setting the operation mode of the shift button You can set the operation mode of the [SHIFT] button assigned to the right edge of a delegation button row (1st row/2nd row) in the AUX bus control block. 1 Open the Home > Setup > Panel > Xpt Module > Key Deleg/AUX Assign menu (19104.33). 2 Select the [AUX] tab. 3 In the [AUX Shift Mode] group, select an operation mode. Hold: Enable the bus in the shifted state of the delegation buttons while pressing the shift button. Lock: Switch the bus between the shifted state and unshifted state of the delegation buttons each time the shift button is pressed. Setting Buttons and Indicators Setting the on/off state of cross-point indicators Cross-point indicators light up in the logical V/K pair color linked to the logical V/K pair assigned to buttons on the 3rd row. You can disable the cross-point indicators so that they do not turn on. 1 Open the Home > Setup > Panel > Xpt Module > Operation Mode menu (19104.31). 2 Display the target switcher bank to set. Select a tab to change the switcher bank to display. 3 Set the on/off state of cross-point indicators using the [Xpt Indicator] button. On: Lit Off: Not lit Setting the color of cross-point buttons You can set the color of the 3rd row/4th row cross-point buttons. 1 Open the Home > Setup > Panel > Xpt Module > Operation Mode menu (19104.31). 2 Display the target switcher bank to set. Select a tab to change the switcher bank to display. 3 In the [Xpt Button Color] group, select a color. Logical V/K Pair Color: Light up in the color set for the logical V/K pair. For details about the logical V/K pair color, see "Setting a Logical V/K Pair Color" (page 382). White: Light up white. Setting the Display You can set the information that appears on the display in the cross-point control block/AUX bus control block. The display items and format can be selected for each of six display modes. 1 Open the Home > Setup > Panel > Xpt Module > Display Mode menu (19104.34). 2 Display the target switcher bank or AUX bus control block to set. 409