Sony MLS-X1 Users Guide - Page 138
Two-Dimensional Transforms on, Reducing, enlarging, moving, and rotating, keys menu
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
• A resizer and dual resizer effects cannot be used on additional keys. Two-Dimensional Transforms on Keys Reducing, enlarging, moving, and rotating keys (menu) 1 Open the Home > M/E-1 > Key1 > Resizer/Proc Key > Resizer Adjust/DME Select menu (11101.41). 2 Set the [Resizer] button to the on state and set the following parameters. No. Parameter 1-1 Location X 1-2 Location Y 1-3 Size 1-4 Rotation X Rotation Y 1-5 Perspective 2-1 Aspect X 2-2 Aspect Y 2-3 Aspect Ratio Adjustment Movement in horizontal direction Movement in vertical direction Size of key Rotation around X-axis a) Rotation around Y-axis b) Viewpoint position (perspective) Aspect ratio in horizontal direction Aspect ratio in vertical direction Simultaneous adjustment of aspect ratio in horizontal direction and vertical direction a) When the [X] button is selected in the [Rotation] group b) When the [Y] button is selected in the [Rotation] group For details about selecting the rotation direction, see "Rotating a key (menu)" (page 139). Reducing, enlarging, moving, and rotating keys (key control block) For details about key control block operations, see "Setting the Key Type (Key Control Block)" (page 119). 1 Press the [M/E-1] button, turning it on. 2 Press the [KEY1] button, turning it on. 3 Press the [RSZR] button, turning it on. 4 Set the following parameters. No. Parameter 1-1 LOC X 1-2 LOC Y 1-3 SIZE 1-4 ROT X ROT Y 1-5 PERS 2-1 ASPECT X 2-2 ASPECT Y 2-3 ASPECT R Adjustment Movement in horizontal direction Movement in vertical direction Size of key Rotation around X-axis a) Rotation around Y-axis b) Viewpoint position (perspective) Aspect ratio in horizontal direction Aspect ratio in vertical direction Simultaneous adjustment of aspect ratio in horizontal direction and vertical direction a) When the [ROT X] button is selected b) When the [ROT Y] button is selected For details about selecting the rotation direction, see "Rotating a key (key control block)" (page 140). Reducing, enlarging, moving, and rotating keys (device control block) Switch the device control block to resizer operation mode to operate a two-dimensional transform. 1 Press the [M/E 1] button. The [M/E 1] button is lit green, and the device control block switches to M/E-1 resizer operation mode. You can select multiple switcher banks. The first selected button becomes the reference channel, and is lit green. Subsequent selected buttons are lit amber. 2 Press the [K1RSZ] button. The [K1RSZ] button is lit green, and key 1 becomes the target of resizer operations. You can select multiple keys. The first selected button becomes the reference channel, and is lit green. Subsequent selected buttons are lit amber. 3 Press the [RSZR ON] button. The [RSZR ON] button turns on and the resizer is enabled. 4 Transform the key. To change the aspect ratio of a key Press the [ASP PERS] button, turning it on, and adjust the setting values using the trackball/Z-ring. 138