Sony MLS-X1 Users Guide - Page 157
Warping the edges of a wipe pattern, Spring, Adding a spiral effect to a wipe pattern, Spiral
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Fringe (radial modulation) This modulates the pattern in the radial direction. 1 Open the Home > M/E-1 > Bus/Transition > Wipe > Main Modify menu (11109.35). 2 In the [Modulation] group, select a modulation type. Set the following parameters. No. Parameter 1 Amplitude 2 Frequency 3 Speed 4 Shape Adjustment Amplitude of modulation Frequency of modulation Speed of ripples • Negative values create waves in the down, left, and counterclockwise directions. • Positive values create waves in the up, right, and clockwise directions. Modulation waveform a) a) 1: Sine wave, 2: Triangle wave, 3: Square wave Warping the edges of a wipe pattern (Spring) This warps the edges of a pattern inward or outward. No. Parameter 1 Width Adjustment Size and direction of the warp • A value of -100.00 corresponds to maximum inward warpage. • A value of +100.00 corresponds to maximum outward warpage. Adding a spiral effect to a wipe pattern (Spiral) This transforms the pattern into a spiral pattern. Spiral disabled Spiral enabled 1 Open the Home > M/E-1 > Bus/Transition > Wipe > Main Modify menu (11109.35). 2 Set the [Spiral] button to the on state and set the following parameters. No. Parameter 1 Magnitude 2 Wave Speed Adjustment Size and direction of the spiral • A value of -100.00 represents the maximum movement in the counterclockwise direction. • A value of +100.00 represents the maximum movement in the clockwise direction. Speed of the lateral waves • Negative values set the speed from the left. • Positive values set the speed from the right. Spring disabled Spring enabled 1 Open the Home > M/E-1 > Bus/Transition > Wipe > Main Modify menu (11109.35). 2 Set the [Spring] button to the on state and set the following parameter. 157