Sony MLS-X1 Users Guide - Page 424
External Device Setup, Setting Parallel Input Ports, Ports
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 424 highlights
External Device Setup 25 Chapter Copying External Device Settings Information When using two control panels in a switcher system, external devices are controlled by control panel 1. Consequently, the external device settings information for control panel 1 must be copied to control panel 2. Copy the external device setup data using the Home > File menu, for example. For details about Home > File menu operations, see "Chapter 19 File Management" (page 329). Setting Parallel Input Ports The use of parallel input ports is assigned in the following priority sequence. 1. External box settings in the Home > Setup > Router/Tally > NS-Bus > Matrix menu (19106.11). Assigned to external boxes according to the parallel input port priority. 2. Tally settings in the Home > Setup > Router/Tally > Tally > Tally Enable menu (19106.23). Tally input is assigned to the selected parallel input port. 3. GPI input port settings in the Home > Setup > External Device > Input Config menu (19105.11). GPI input settings are configured for parallel input ports not used for external boxes or tally input. GPI input is also supported via a network. The GPI input port settings are the same as for parallel input ports. For details, see "GPI input via a network" (page 425). Assigning a GPI Input 1 Open the Home > Setup > External Device > Input Config menu (19105.11). A list of parallel input ports is shown on the left and a list of GPI inputs is shown on the right. 2 In the list on the left, select the target parallel input port to set. The number for a parallel input port is displayed in "logical box ID (1 to 3) -board (1 to 3) -number (1 to 6)" format (for example, "1-3-6"). 424