Sony MLS-X1 Users Guide - Page 114
Executing an independent key transition, key fader control block
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Executing an independent key transition (key fader control block) You can execute an independent key transition for a key assigned to a key delegation button. For details about assigning key delegation buttons, see "Assigning Control Panel Buttons" (page 402). To insert/remove a key instantaneously Press the [KEY ON] button. Note The [KEY ON] button label indicates the key assigned to the key delegation button. To insert/remove a key with the preset transition type and transition rate Press the [AUTO TRANS] button for the corresponding key. During the transition execution, the button is lit amber and goes off when the transition is completed. Notes • You can change this so that during the execution of the transition, the button is lit green and when the transition is completed it is lit red if on-air or lit amber if not onair. For details about settings, see "Setting the independent key transition, auto transition execution button display" (page 417). • When a cut is selected as the transition type, the key is inserted/removed instantaneously. To insert/remove a key manually with the preset transition type Operate using the fader lever. Note You can set the key which is the target of fader lever operation. For details about setting the fader lever, see "Assigning Control Panel Buttons" (page 402). Executing an independent key transition (menu) This section describes the M/E-1 key 1 menu as an example. 1 Open the Home > M/E-1 > Key1 > Key Snapshot menu (11101.71). 2 Execute a transition. To insert/remove a key instantaneously Press the [KEY ON] button. To insert/remove a key with the preset transition type and transition rate Press the [KEY TRANS] button. Note When a cut is selected as the transition type, the key is inserted/removed instantaneously. 114