Sony MLS-X1 Users Guide - Page 382

Note When multiple logical V/K pair numbers are selected, consecutively numbered logical V/K pair names are set. For details, see "Name settings when multiple items are selected" (page 78). Copying a logical V/K pair name table You can copy settings between logical V/K pair name tables. 1 Open the Home > Setup > Xpt Assign > V/K Pair > Copy Logical V/K Pair Name menu (19102.23). A list of copy source tables is shown on the left, and a list of copy destination tables is shown on the right. 2 Select copy source and copy destination tables. 3 Press the [Copy] button. 4 Check the message, then press [OK]. 2 Select the target user color (User Color 1 to User Color 8) to set in [Target]. 3 Adjust the color in [Adjust Color]. Color adjustment sliders and the adjusted colors are displayed in [Adjust Color]. Adjust the color using the [R] (red), [G] (green), and [B] (blue) sliders while monitoring the color. To select a preset color Select a color in [Reset Color]. To return to the previous user color Press the [Clear] button. 4 Press the [Apply] button. Setting a Logical V/K Pair Color You can set a V/K pair color linked to a logical V/K pair. 1 Open the Home > Setup > Xpt Assign > V/K Pair > Logical V/K Pair Assign menu (19102.24). 2 Select the target logical V/K pair number to set. To select and set multiple logical V/K pair numbers, place a check mark beside the target logical V/K pair numbers to set. To select and set all logical V/K pair numbers, place a check mark in the Select All checkbox. 3 Press the [V/K Pair Color] button and select a user color (User Color 1 to User Color 8) from the pulldown list. Changing the user color Note The color of the buttons may be different to the color adjusted using the menu. After adjusting the color, check the actual color of the button when it is lit. 1 Open the Home > Setup > Xpt Assign > V/K Pair > Edit User Color menu (19102.25). 382