Sony MLS-X1 Users Guide - Page 372
HDR Converter] window > [Additional, Paint] tab, Standard, Hyper
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 372 highlights
list. Press the [Slope (Abs.)] button and select a slope for the curve from the pull-down list. Off: Disable the highlight creation function. Note This cannot be set when the input signal conversion mode is set to [Display Referred]. 2 Press the [HDR Gain (dB)] button and enter a gain for converting in the numeric keypad window. 3 In the [De-Gamma] group, set the type of gamma curve for the inverse conversion. Standard: Use standard. Press the button on the right of the [Standard] button and enter a table number (1 to 7) in the numeric keypad window. Hyper: Use hypergamma. Press the button on the right of the [Hyper] button and enter a table number (1 to 4) in the numeric keypad window. Note This cannot be set when the input signal conversion mode is set to [Display Referred]. 4 Enable/disable the black clip function using the [HDR Black Clip] button. On: Enable the black clip function. Off: Disable the black clip function. Note This cannot be set when the system OETF is set to [SLog3 (HDR)] or [S-Log3 (Live HDR)]. When converting from HDR to SDR 1 Enable/disable the knee function using the [Knee] button. On: Enable the knee function. Press the [Point (Abs.)] button and select a knee point position for the curve from the pull-down list. Press the [Slope (Abs.)] button and select a slope for the curve from the pull-down list. Off: Disable the knee function. 2 Enable/disable the white clip function using the [White Clip] button. On: Enable the white clip function. Press the button on the right of the [White Clip] button and enter a video signal level in the numeric keypad window. Off: Disable the white clip function. 3 Press the [SDR Gain (dB)] button and enter a gain for converting in the numeric keypad window. 4 In the [Gamma (Table)] group, select a type of gamma curve. Standard: Use standard. Press the button on the right of the [Standard] button and enter a table number (1 to 7) in the numeric keypad window. Press the [Step] button and enter a gamma strength (step) in the numeric keypad window. The effect changes in increments of 0.05. Press the [Level] button and enter a gamma strength (level) in the numeric keypad window. Hyper: Use hypergamma. Press the button on the right of the [Hyper] button and enter a table number (1 to 4) in the numeric keypad window. [HDR Converter] window > [Additional Paint] tab Adjusts the image quality of the input signal. 1 Set the [Additional Paint] button to the on state. When not adjusting the image quality, set the [Additional Paint] button to the off state. 2 Set the white balance function using the [White Balance] button. On: Adjust the white balance. Press the [R] button and enter an R gain value in the numeric keypad window. Press the [B] button and enter a B gain value in the numeric keypad window. Off: Do not adjust the white balance. 3 Set the master white gain function using the [Master White Gain (dB)] button. On: Adjust the master white gain. Press the right button and enter a master white gain value in the numeric keypad window. Off: Do not adjust the master white gain. 4 Set the saturation using the [Saturation] button. On: Adjust the saturation. Press the right button and enter a saturation in the numeric keypad window. Off: Do not adjust the saturation. 372