Sony MLS-X1 Users Guide - Page 276
Moving a register, Swapping registers, Changing main/sub configuration data in, multi program 2 mode
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
The [Select Region] window appears. 3 Set the button for the copy source region to the on state. Select a tab to change the region to display. [ME] tab: Switcher bank regions [User] tab: User regions [DME] tab: DME regions [External Device] tab: External device regions 4 Press [OK]. 5 In the list on the left, select a copy source register. To select and copy multiple registers, place a check mark beside the target registers to copy. To select and copy all registers, place a check mark in the Select All checkbox. You can also press the [Select Register(s)] button and enter a register number in the numeric keypad window. 6 Press the [Select] button in the [Region] group on the right. The [Select Region] window appears. 7 Set the button for the copy destination region to the on state. Select a tab to change the region to display. 8 Press [OK]. 9 In the list on the right, select a copy destination register. When multiple registers are selected, select the first copy destination register. You can also press the [Select Destination] button and enter a register number in the numeric keypad window. The copy destination of the first register selected on the left is the first register selected on the right, and the subsequent registers on the right in the same relative positions as the selected registers on the left become copy destinations. The first register on the right is shown in light blue, and the subsequent copy destination registers are shown in blue gray. 10Press the [Copy] button. 11Check the message, then press [OK]. To search for a register Press the [Search] button, enter a character string to search for in the input field in the displayed window, and press the [Enter] button. Only registers containing the entered character string are displayed. To copy without renaming a destination register Set the [w/o Name] button to the on state. Moving a register Notes • An empty register cannot be moved. • A locked register cannot be moved. Select a move source register and move destination register in the same way as for copying a register and press the [Move] button. For details, see "Copying a register" (page 275). To move without renaming a destination register Set the [w/o Name] button to the on state. Swapping registers Select the registers to swap in the same way as for copying a register and press the [Swap] button. For details, see "Copying a register" (page 275). To swap without renaming the registers Set the [w/o Name] button to the on state. Changing main/sub configuration data in multi program 2 mode When an effect timeline is recalled on main or sub in multi program 2 mode, only the keys being used on main and sub, according to the operation mode configuration data of the switcher bank, become the recall target. You can also automatically change the operation mode configuration data saved in a register when copy/move/ swap operations are performed between main and sub registers. You can enable/disable this using the [MP2 Auto Correct] button when main and sub on a switcher bank are selected as the target regions in the Home > Register > Effect Timeline > Edit Register > Copy/Move/Swap menu (18301.33). On: Change the operation mode configuration data for main and sub. Off: Do not change the operation mode configuration data. Note The setting of the [MP2 Auto Correct] button is common to snapshots. 276