Sony MLS-X1 Users Guide - Page 442
Setting a Key Link, Setting a Transition Link
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 442 highlights
Setting a Key Link Setting a Transition Link You can link the transition operations between keys. The following operations are linked. • Auto transition in an independent key transition • Key on/off in an independent key transition 1 Open the Home > Setup > Link > Key Transition Link > Link in Single M/E menu (19107.31). 2 Display the target switcher bank to set. Select a tab to change the switcher bank to display. 3 Select the target key to set. 4 Enable/disable the link using the [Link Enable] switch. On: Enable link. Off: Disable link. 5 Press the [Edit] button for [Linked Key]. The [Linked Key] window appears. 6 Place a check mark in a link destination key. You can set multiple keys. 7 Press [OK]. To link the key selection of a next transition Set the [Next Trans. Link] button to the on state. The keys are linked and the next transition selection buttons in the transition control block are selected. Example: When key 2 and key 3 are linked to key 1: When key 1 is selected in a next transition, key 2 and key 3 are also selected. Note The link setting of the next transition selection buttons is common to all switcher banks. Linking independent key transitions between M/Es You can link the key operations between switcher banks. The following operations are linked. • Auto transition in an independent key transition • Key on/off in an independent key transition 1 Open the Home > Setup > Link > Key Transition Link > Link in Multi M/Es menu (19107.32). 2 Select the target link number to set. To select and set multiple link numbers, place a check mark beside the target link numbers to set. To select and set all link numbers, place a check mark in the Select All checkbox. 3 Enable/disable the link using the [Link Enable] switch. On: Enable link. Off: Disable link. 4 Press the [Edit] button for [Controlling Key]. The [Assign Controlling Key] window appears. 5 Set the button for the link source key to the on state. 6 Press [OK]. 7 Press the [Edit] button for [Linked Key]. The [Assign Linked Key] window appears. 8 Set the button for the link destination key to the on state. 9 Press [OK]. 442