Sony MLS-X1 Users Guide - Page 174

Note When the system signal format is 2160P, only the [FM 1&2 Clip]/[FM 3&4 Clip]/[FM 5&6 Clip] button or the [FM 7&8 Clip]/[FM 9&10 Clip]/[FM 11&12 Clip] button can be selected depending on the setting in the Home > Setup > Switcher > Box Settings > DME/FM Channel Assign menu (19103.53). Setting a Clip Transition 1 Open the Home > M/E-1 > Bus/Transition > Transition > Clip Transition menu (11109.22). 2 Press the [FM1/FM2 Recall] button. The Home > Frame Memory > FM1/FM2 > Clip/Still > Recall menu (13101.11) appears. Select content for use in a clip transition and recall it on a frame memory output channel. For details, see "Recalling Video" (page 184). 3 Return to the Home > M/E-1 > Bus/Transition > Transition > Clip Transition menu (11109.22). 4 Press the [Linear Key Adjust] button and set a clip transition key using the following parameters. No. Parameter 1 Clip 2 Gain 3 Density Adjustment Reference level for key signal generation Key gain Key density 5 Press the [Background Transition] button and select a background transition type from the pull-down list. Mix: Mix NAM: Non-additive mix Super Mix: Super mix Preset Color Mix: Preset color mix Wipe: Wipe DME Wipe: DME wipe When [Super Mix] is selected, press the [Super Mix] button and set the parameters. For details, see "Setting Super Mix" (page 100). When [Preset Color Mix] is selected, press the [Preset Color Mix] button and set the parameters. For details, see "Setting a Preset Color Mix" (page 100). When [Wipe] is selected, press the [Wipe>Main Pattern] button to open the Home > M/E-1 > Bus/ Transition > Wipe > Main Pattern menu (11109.31) and select a wipe pattern. For details, see "Setting a Wipe" (page 149). When [DME Wipe] is selected, press the [DME Wipe>1ch Pattern] button to open the Home > M/E-1 > Bus/Transition > DME Wipe > 1ch Pattern menu (11109.41) and select a DME wipe pattern. To use a DME wipe pattern in 2-channel mode, open the Home > M/E-1 > Bus/Transition > DME Wipe > 2ch Pattern menu (11109.42) and select a DME wipe pattern. To use a DME wipe pattern in 3-channel mode, open the Home > M/E-1 > Bus/Transition > DME Wipe > 3ch Pattern menu (11109.43) and select a DME wipe pattern. For details, see "Setting a DME Wipe" (page 165). 6 In the [Background Transition Timing] group, set the start position and stop position of the background transition. To set the start position Set using any of the following methods. • Move the fader lever to the start position and press the [Set Start] button. • Press the button on the right side of the [Set Start] button and enter a start position in the numeric keypad window (number of frames). To set the stop position Set using any of the following methods. • Move the fader lever to the stop position and press the [Set Stop] button. • Press the button on the right side of the [Set Stop] button and enter a stop position in the numeric keypad window (number of frames). To reset the start position and stop position Press the [Reset Timing] button. 7 In the [Background Transition Direction] group, set the transition direction of the background transition. Normal: Normal Normal/Reverse: Normal/reverse Reverse: Reverse Note This can be configured only when a wipe or DME wipe is selected as the background transition type. 8 In the [FM Timing] group, set the start position and stop position of the frame memory video. To set the start position Set using any of the following methods. • Move the fader lever to the start position and press the [Set Start] button. 174