Sony MLS-X1 Users Guide - Page 29
Independent Key Transition Control Block, Fader lever/transition indicator, assignable buttons
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
c Fader lever/transition indicator Fader lever Lock button Transition indicator Name Fader lever Transition indicator Description Move this up or down to execute a transition. You can press the [KF] button, turning it on, to use the fader lever as a keyframe fader. You can press the lock button to unlock the fader lever and split it into two for use as split faders. Displays the transition progress using LEDs. Independent Key Transition Control Block The independent key transition control block is used to execute independent key transitions. For details, see "Chapter 5 Transitions" (page 94). a b a Independent key transition execution buttons (assignable buttons) You can assign execution buttons for independent key transitions in the Home > Setup > Panel > Module > Button Assign menu (19104.21). For details about assigning buttons, see "Assigning Control Panel Buttons" (page 402). Function name Current Bank: Key 1 Transition to Key 8 Transition Button name KEY1 ON to KEY8 ON AUTO TRANS Other Banks: KEY1 ON M/E-x Key 1 to KEY8 Transition to M/E- ON x Key 8 Transition (M/E-x = M/E-1 to M/E-5) P/P Key 1 Transition to P/P AUTO TRANS Key 8 Transition Description Inserts or removes a key instantaneously. If a key is currently inserted, the button is lit amber. Inserts or removes a key automatically with the set transition rate and transition type. During the transition, the button is lit amber. Inserts or removes a key instantaneously. If a key is currently inserted, the button is lit amber. Inserts or removes a key automatically with the set transition rate and transition type. During the transition, the button is lit amber. Notes • The [KEYx ON] button (x = 1 to 8) and the [AUTO TRANS] button for the same key are assigned as a set. • You can also assign keys of any switcher banks (M/E-1 to M/E-5, P/P). b Display Displays the following information for each key assigned to an independent key transition execution button. • Key content name (key source name when a key source is selected on a cross-point control block key bus) • Currently used DME channel or resizer • Transition rate • Transition type 29