Sony MLS-X1 Users Guide - Page 281
Snapshot Operations (Numeric Keypad Control Block
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 281 highlights
Snapshot Operations (Numeric Keypad Control Block) You can operate a snapshot in a region assigned to a region selection button in the numeric keypad control block. For details about regions, see "Types of Regions" (page 79). Note You can select a region that is not assigned to a region selection button in the [Recall/Store Register] window in the menu. For details, see "Shotbox Operations (Menu)" (page 296). Snapshot operation mode Press the [SNAPSHOT] button in the numeric keypad control block, turning the [SNAPSHOT] button and [RCALL] button on amber, to switch to snapshot operation mode. Select a region using the region selection buttons, then enter a register number in the numeric keypad area to select a register. The selected regions are shown on the display. The reference region is displayed highlighted. The name of the reference region and register number are displayed at the bottom of the display on the right side. For details about selecting a region, see "Selecting a region" (page 255). For details about selecting a register, see "Selecting a register" (page 256). Note Displaying the [Recall/Store Register] window for a snapshot using the menu switches the numeric keypad control block to snapshot operation mode. Recalling a Snapshot You can recall a snapshot register by switching the numeric keypad control block to snapshot operation mode. 1 Press the [SNAPSHOT] button. The [SNAPSHOT] button and [RCALL] button turn on amber, and the numeric keypad control block switches to snapshot operation mode. 2 Select the target region to set using the region selection buttons. You can select multiple regions. For details about selecting a region, see "Selecting a region" (page 255). To select all regions configured beforehand Press the [ALL] button. For details about setting the regions selected simultaneously, see "Setting Regions Selected Simultaneously" (page 402). 3 Enter a register number in the numeric keypad area. For details about selecting a register, see "Selecting a register" (page 256). To add the auto transition temporary attribute Press the [AUTO TRANS] button, turning it on green. To add the effect dissolve temporary attribute Press the [EFF DISS] button, turning it on green. Note In the numeric keypad control block, it is not possible to add the cross-point hold temporary attribute. You can use the bus override function and the crosspoint button row cross-point hold function. For details, see "Cross-Point Hold" (page 90). 4 Press the [ENTER] button. The specified register is recalled. To undo a register recall To undo a recall immediately after recalling a register, press the [UNDO] button. Saving a Snapshot You can save a snapshot register by switching the numeric keypad control block to snapshot operation mode. 1 Press the [SNAPSHOT] button. The [SNAPSHOT] button and [RCALL] button turn on amber, and the numeric keypad control block switches to snapshot operation mode. 281