Sony MLS-X1 Users Guide - Page 112

To delete the entered value Press the [CLR] button. Note You can also enter a difference value from the currently set value using the [TRIM] button. For details, see "Entering a difference from a current value" (page 79). 4 Press the [ENTER] button. The entry is applied and the set value is reflected on the memory recall button in the utility/shotbox control block. Setting the independent key transition rate (menu) This section describes the M/E-1 key 1 menu as an example. 1 Open the Home > M/E-1 > Key1 > Transition > Transition Type menu (11101.51). 2 Select a transition type in the [Transition Type] group. When an operation mode that supports configuration of transitions where keys are inserted/removed independently is set, select a transition type for key insertion in the [ON Transition Type] group and a transition type for key removal in the [OFF Transition Type] group. 3 Set the transition rate using the following parameter. No. Parameter Adjustment 1 Transition Rate Transition rate Note When a cut is selected as the transition type, it is not possible to set the transition rate. To set the transition rate in list view You can set the transition rate in transition rate list view on each switcher bank. 1 Open the Home > Utility > Transition Rate menu (18201.21). The transition rate for common transitions and independent key transitions is displayed for each switcher bank. 2 Select the target switcher bank to set. 3 Press the [Edit] button. The transition rate setup window appears. 4 Press a [Key1] to [Key8] button and enter a transition rate in the numeric keypad window. When an operation mode that supports configuration of transitions where keys are inserted/removed independently is set, select a transition type for key insertion using a [Key1] to [Key8] button in [Key On] and a transition type for key removal using a [Key1] to [Key8] button in [Key Off]. 5 Press [OK]. Checking the independent key transition rate setting On the ICP-X7000, you can check the transition rate on the display in the independent key transition execution section of the transition control block, display in the independent key transition control block, or display in the key fader control block. Executing an Independent Key Transition An independent key transition can be executed using the transition control block, independent key transition control block, key fader control block, or the menu. Notes • In the simple-type transition control block, an independent key transition cannot be executed. • In an independent key transition, the pattern limit function is not available. 112