Sony MLS-X1 Users Guide - Page 151

Select a wipe pattern in the same way as for the main pattern. Notes • Rotary wipe patterns cannot be selected. • Some patterns may not be available for a sub pattern, depending on the selected main pattern. For details, see "Relationship between main pattern and sub pattern" (page 150). 3 Open the Home > M/E-1 > Bus/Transition > Wipe > Pattern Mix/Edge/Direction menu (11109.33). 4 In the [Pattern Mix] group, select a type of pattern mix. Mix: Mix + NAM: Positive NAM - NAM: Negative NAM Morphing: Morphing When the [Mix] button, [+ NAM] button, or [- NAM] button is selected, set the following parameter. No. Parameter 1 Mix Ratio Adjustment Proportion of sub pattern relative to main pattern When the [Morphing] button is selected, set the following parameters. No. Parameter 1 Start 2 End Adjustment Point in the transition at which the main pattern is at 100% Point in the transition at which the sub pattern is at 100% 5 In the [Main/Sub Link] group, configure the modifier link. Full: Full link mode Semi: Semi link mode To disable modifier link, set both the [Full] button and [Semi] button to the off state. Setting a dust mix You can set a dust mix for a selected wipe pattern. 1 Open the Home > M/E-1 > Bus/Transition > Wipe > Pattern Mix/Edge/Direction menu (11109.33). 2 Set the [Dust Mix] button to the on state and set the following parameters. No. Parameter 1 Mix Ratio Adjustment Proportion of diamond dust wipe pattern No. Parameter 2 H Size 3 V Size 4 Flash Rate Adjustment Particle width Particle height Rate of generation of particles Setting Modifiers You can add modifiers to modify a wipe pattern. Relationship between wipe pattern and modifiers Some modifiers may not be available, depending on the wipe pattern. The following table shows the supported modifiers for each wipe pattern. a: Available ×: Not available Modifier Standard Enhanced Rotary Mosaic wipes wipes wipes wipes Random/ diamond dust wipes Direction a a aa a Split a a × a a Edge a a Position aa) ab) Rotation a a Aspect ad) a Multiplication a a Pairing af) a aa a ac) × × ac) × × × × × a ae) × × × × Modulation a a (H, V) Modulation ag) a (Fringe) Spring ag) a Spiral ah) a a × × × × × × × × × × × a) Pattern numbers 1 to 16, 19, and 20 are not available. b) Pattern numbers 300 to 303 are not available. c) Pattern numbers 100 to 103, 150, 151, 156, 158, 604, and 606 are not available. d) Pattern numbers 1 to 8, 17, and 18 are not available. e) Pattern numbers 220 to 223 are not available. f) Pattern numbers 19 to 20 are not available. g) Pattern numbers 1 to 20 and 22 are not available. h) Pattern numbers 1 to 20, 22, and 24 are not available. Main pattern and sub pattern modifiers The following modifiers are common to the main pattern and sub pattern. • Direction • Split • Edge 151