Sony MLS-X1 Users Guide - Page 290
Moving a register, Swapping registers, Open the Home > Register > Key Snapshot > Edit
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
5 In the list on the left, select a copy source register. To select and copy multiple registers, place a check mark beside the target registers to copy. To select and copy all registers, place a check mark in the Select All checkbox. You can also press the [Select Register(s)] button and enter a register number in the numeric keypad window. 6 Press the [Select] button in the [Key Region] group on the right. The [Select Region] window appears. 7 Set the button for the copy destination key to the on state. 8 Press [OK]. 9 In the list on the right, select a copy destination register. When multiple registers are selected, select the first copy destination register. You can also press the [Select Destination] button and enter a register number in the numeric keypad window. The copy destination of the first register selected on the left is the first register selected on the right, and the subsequent registers on the right in the same relative positions as the selected registers on the left become copy destinations. The first register on the right is shown in light blue, and the subsequent copy destination registers are shown in blue gray. 10Press the [Copy] button. 11Check the message, then press [OK]. To copy without renaming a destination register Set the [w/o Name] button to the on state. Moving a register Notes • An empty register cannot be moved. • A locked register cannot be moved. Select a move source register and move destination register in the same way as for copying a register and press the [Move] button. For details, see "Copying a register" (page 289). To move without renaming a destination register Set the [w/o Name] button to the on state. Swapping registers Select the registers to swap in the same way as for copying a register and press the [Swap] button. For details, see "Copying a register" (page 289). To swap without renaming the registers Set the [w/o Name] button to the on state. Locking a register 1 Open the Home > Register > Key Snapshot > Edit Register > Browse menu (18303.11). 2 Select the target key to set. For details, see "To select a key" (page 289). 3 Select the target register to lock. To select and lock multiple registers, place a check mark beside the target registers to lock. To select and lock all registers, place a check mark in the Select All checkbox. You can also press the [Select Register(s)] button and enter a register number in the numeric keypad window. 4 Press the [Lock] button. To release the lock Select the target register to unlock and press the [Unlock] button. Deleting a register Note A locked register cannot be deleted. 1 Open the Home > Register > Key Snapshot > Edit Register > Browse menu (18303.11). 2 Select the target key to set. For details, see "To select a key" (page 289). 3 Select the target register to delete. To select and delete multiple registers, place a check mark beside the target registers to delete. To select and delete all registers, place a check mark in the Select All checkbox. You can also press the [Select Register(s)] button and enter a register number in the numeric keypad window. 4 Press the [Delete] button. 290