Sony MLS-X1 Users Guide - Page 133
Masks, Setting a Mask
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Masks You can set a main mask and sub mask. Setting a Mask This section describes the M/E-1 key 1 menu as an example. Setting a main mask 1 Open the Home > M/E-1 > Key1 > Mask menu (11101.31). 2 In the [Mask Type] group, select a mask type. Key Mask: Key mask Bkgd Mask: Background mask 3 In the [Mask Source] group, select a mask source. Box: Box Pattern: Mask pattern When the [Box] button is selected, set the following parameters. No. Parameter 1 Top 2 Left 3 Right 4 Bottom 5 Soft Adjustment Position of top edge Position of left edge Position of right edge Position of bottom edge Softness of box When the [Pattern] button is selected, set the following parameters. No. Parameter 1 Size 2 Soft 5 Pattern Adjustment Pattern size Softness of the pattern contour Pattern number (1 to 24) Notes • You can also select a mask pattern by pressing the [Mask Ptn Select] button and selecting from the pattern selection window. • Mask patterns 1 to 24 are the same as standard wipe patterns 1 to 24. To invert a mask area Set the [Mask Invert] button to the on state. To set modifiers for a mask pattern You can set the following modifiers when a mask pattern is selected. Position: Set the [Position] button to the on state and set the parameters. For details about setting parameters, see "Setting the wipe pattern position (Position)" (page 158). Multiplication: Set the [Multi] button to the on state and set the parameters. For details about setting parameters, see "Replicating a wipe pattern (Multi)" (page 159). Aspect: Set the [Aspect] button to the on state and set the parameters. For details about setting parameters, see "Setting the aspect ratio of a wipe pattern (Aspect)" (page 159). Rotation (angle): Set the [Angle] button in the [Rotation] group to the on state and set the parameters. For details about setting parameters, see "Rotating a wipe pattern (Rotation)" (page 158). Rotation (speed): Set the [Speed] button in the [Rotation] group to the on state and set the parameters. For details about setting parameters, see "Rotating a wipe pattern (Rotation)" (page 158). Setting a sub mask 1 Open the Home > M/E-1 > Key1 > Mask menu (11101.31). 2 In the [Sub Mask Type] group, select a sub mask type. Key Mask: Key mask Bkgd Mask: Background mask 3 Press the [Sub Mask Adjust] button and set a sub mask source using the following parameters. The utility 1 bus signal is used for the sub mask source. For details about selecting a signal, see "Chapter 4 Selecting Signals" (page 81). No. Parameter 1 Clip 2 Gain Adjustment Reference level for mask creation Gain 133