Sony MLS-X1 Users Guide - Page 76
Initializing Settings Default Recall, Entering parameters using the utility, control block
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
The parameters return to the initial status saved data setting values. Entering parameters using the utility control block Press the [MENU] button in the utility control block to switch to menu parameter operation mode. You can set parameters of the currently displayed menu using the adjustment knobs. Adjustment knobs 1 to 5 correspond to the parameter 1 to 5 buttons. Adjust parameters by turning the adjustment knobs clockwise or counterclockwise. Note The control panel must be linked with the menu. For details, see "Linking a Control Panel with the Menu" (page 78). Setting parameters using the device control block Press the [MENU] button in the device control block to switch to menu parameter operation mode. You can set parameters of the currently displayed menu using the trackball and Z-ring. • The trackball X-axis direction corresponds to the parameter 1 button. Adjust the parameter by moving the trackball left/right. • The trackball Y-axis direction corresponds to the parameter 2 button. Adjust the parameter by moving the trackball up/down. • The Z-ring corresponds to the parameter 3 button. Adjust the parameter by turning the Z-ring clockwise or counterclockwise. • Press the [FINE] button to switch to fine mode, enabling fine adjustment of setting values using the trackball and Z-ring. Note The control panel must be linked with the menu. For details, see "Linking a Control Panel with the Menu" (page 78). Initializing Settings (Default Recall) You can return a menu to the initial status saved data setting value if a default recall button is displayed. Notes • You can initialize a parameter setting values using a default recall button in the analog controls window. For details, see "Returning parameters to the initial settings" (page 75). • You can initialize a key setting values using buttons in the key control block. For details, see "Initializing Key Settings" (page 137). • You can initialize switcher bank and two-dimensional transform (resizer) setting values using buttons in the device control block. For details, see "Reducing, enlarging, moving, and rotating keys (device control block)" (page 138). • You can initialize three-dimensional transform (DME) setting values using buttons in the device control block or the menu. For details, see "Three-Dimensional Transform Operations (Device Control Block)" (page 199) and "Three-Dimensional Transform Operations (Menu)" (page 202). Default recall button 1 Press the [Default Recall] button. 2 Check the message, then press [OK]. The menus below the selected level 3 menu return to their initial settings. Note In the case where a level 3 menu does not exist, the menus below the level 2 menu return to their initial settings. Default recall target menus • Home > M/E-x > Keyx menus • Home > M/E-x Sub > Keyx menus • Home > P/P > Keyx menus • Home > P/P Sub > Keyx menus (M/E-x = M/E-1 to M/E-5, Keyx = Key1 to Key8) When default recall is executed, all the menus below the level 3 menu return to their initial settings. However, the settings in the following lower level menus are not affected by default recall. • Type > Type Select menu > [Video Process] button settings 76