Sony MLS-X1 Users Guide - Page 208
Setting Mono, Setting a Mosaic, Group 1, Angle, Speed
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
No. Parameter 2 Mix C 3 Mix All Adjustment Chrominance signal mix amount Simultaneous adjustment of luminance signal and chrominance signal mix amounts 3 Press the [Sepia Color] button and set the sepia color using the following parameters. No. Parameter 1 Luminance 2 Saturation 3 Hue Adjustment Luminance Saturation Hue Setting Mono Note Enabling Mono disables Sepia if it is set. 1 Open the Home > DME > Channel1 > Video Modify > Color Modify menu (15101.32). 2 Set the [Mono] button to the on state. Setting a Mosaic 1 Open the Home > DME > Channel1 > Video Modify > Mosaic menu (15101.33). 2 Set the [Mosaic] button to the on state and set the following parameters. No. Parameter 1 Size 2 Aspect Adjustment Tile size Tile aspect ratio • Negative values expand vertically. • Positive values expand horizontally. Setting a Mask You can mask out part of a Defocus, Sepia, Mono, or Mosaic effect. Separate masks can be set for group 1 effects (Sepia, Mono, Mosaic) and group 2 effects (Defocus). Note If a border has been set and then masks are enabled on both group 1 effects and group 2 effects, the Border effect will also be masked. 1 Open the Home > DME > Channel1 > Video Modify > Mask menu (15101.34). 2 In [Effect Group], set the [Mask] switch for the target effect to the on state. Group 1: Sepia, Mono, and Mosaic effects Group 2: Defocus effect 3 Press the [Position/Size] button and set the mask pattern using the following parameters. No. Parameter 1 H 2 V 3 Size 4 Soft 5 Pattern Adjustment Horizontal position Vertical position Size Softness Pattern number (21, 24, 304) Note The mask patterns are the same as wipe pattern numbers 21, 24, and 304. To set the aspect ratio of a mask pattern (Aspect) Press the [Aspect] button and set the following parameter. No. Parameter 1 Aspect Adjustment Aspect ratio • Negative values expand vertically. • Positive values expand horizontally. To rotate a mask pattern In the [Rotation] group, select a rotation type. Angle: Incline a pattern at a fixed angle. Speed: Rotate a pattern at a fixed speed. When the [Angle] button is selected, set the following parameter. No. Parameter 1 Angle Adjustment Inclination angle of pattern • A value of -1.00 corresponds to a rotation of one turn counterclockwise. • A value of +1.00 corresponds to a rotation of one turn clockwise. • A value of 0.00 corresponds to no rotation. 208