Sony MLS-X1 Users Guide - Page 312
Selecting an edit point, Inserting an event, Modifying an event, To undo saving a macro
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 312 highlights
For details about selecting a register, see "Selecting a register" (page 256). 7 Press the [ENTER] button. The created/edited macro is saved in the register, and the [STORE STATS] button and [RCALL] button turn on amber. To undo saving a macro While the [STORE STATS] button is lit amber, press and hold the [STORE STATS] button and press the [UNDO] button. Editing a Macro Event You can edit a macro event by switching the utility/ shotbox control block to effect timeline/macro edit mode. Selecting an edit point Move to the target event (edit point) to edit in the macro. To move to the previous event Press the [PREV EVENT] button in the utility/shotbox control block. To move to the next event Press the [NEXT EVENT] button in the utility/shotbox control block. To move to a specified event number Press the [GOTO EVENT] button in the utility/shotbox control block, enter an event number in the numeric keypad area of the numeric keypad control block, and press the [ENTER] button. Inserting an event 1 Select an edit point. 2 Perform an operation to register as an event. When auto insert mode is enabled, the event is inserted after the selected event automatically. When auto insert mode is disabled, press the [INS] button in the utility/shotbox control block to insert an event. When you press the [INS] button, an event is inserted after the selected event. When you press and hold the [SHIFT] button and press the [INS] button, the event is inserted before the selected event. Inserting a pause event For details about pause events, see "Pause event" (page 305). 1 Select an edit point. 2 Press the [PAUSE] button, turning it on blue, in the utility/shotbox control block. 3 Enter a pause time in the numeric keypad area in the numeric keypad control block and press the [ENTER] button. The color of the [PAUSE] button in the utility/ shotbox control block changes to orange. When auto insert mode is enabled, the pause event is inserted after the selected event automatically. When auto insert mode is disabled, press the [INS] button in the utility/shotbox control block to insert a pause event. When you press the [INS] button, a pause event is inserted after the selected event. When you press and hold the [SHIFT] button and press the [INS] button, the event is inserted before the selected event. Note When auto pause insert mode is enabled, the [PAUSE] button operation inserts a pause event only. Another pause event is not inserted automatically between the pause event inserted using the [PAUSE] button and the next event. Modifying an event 1 Select an edit point. 2 Disable auto insert mode if it is enabled. 3 Perform an operation to register as an event. 4 Press the [MOD] button in the utility/shotbox control block. The selected event is modified. Note You can also select and modify multiple events. For details, see "Selecting multiple events" (page 313). Deleting an event 1 Select an edit point. 2 Press the [DEL] button in the utility/shotbox control block. The selected event is deleted. 312