Sony MLS-X1 Users Guide - Page 280
Recalling a Snapshot, Switcher bank region snapshot
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 280 highlights
The button color varies as follows, according to the register state. Gray characters: Register not containing a registered snapshot White characters: Register containing a registered snapshot Lit orange: Last recalled register Note You can set the button display for registers with a registered snapshot to either the register name or register number. The register number is displayed if a register name has not been configured. For details about setting the button display, see "Setting the button display in snapshot operation mode" (page 419). Recalling a Snapshot Switcher bank region snapshot 1 Press the [SNAPSHOT] button. The memory recall section switches to snapshot operation mode. 2 Select a bank. For details about selecting a bank, see "Selecting a bank" (page 279). 3 Select a register to recall a snapshot. Press the button for the target register. The register button is lit orange and the snapshot is recalled. To add the auto transition temporary attribute Press the [AUTO TRANS] button, turning it on orange, and press the register button. To add the effect dissolve temporary attribute Press the [EFF DISS] button, turning it on orange, and press the register button. Note In the Flexi Pad control block, it is not possible to add the cross-point hold temporary attribute. You can use the bus override function and the crosspoint button row cross-point hold function. For details, see "Cross-Point Hold" (page 90). To undo a register recall To undo a recall immediately after recalling a register, press the [UNDO] button. Saving a Snapshot Switcher bank region snapshot Set the state to save in a snapshot and use the following procedure to save in a snapshot register. 1 Press the [SNAPSHOT] button. The memory recall section switches to snapshot operation mode. 2 Select a bank. For details about selecting a bank, see "Selecting a bank" (page 279). 3 Select a register to save a snapshot. Press and hold the [SNAPSHOT] button and press the button for the target register. The register button is lit orange and the snapshot is saved. To add the auto transition attribute Press and hold the [SNAPSHOT] button and press the [AUTO TRANS] button, then continue pressing the [SNAPSHOT] button and press a register button. To add the effect dissolve attribute Press and hold the [SNAPSHOT] button and press the [EFF DISS] button, then continue pressing the [SNAPSHOT] button and press a register button. For details about setting an attribute, see "Setting an attribute" (page 286). Note If you press a register button in which a snapshot is already saved, the register data will be overwritten. To delete a register Note A locked register cannot be deleted. Press and hold the [DEL] button and press the button for the target register to delete. 280