Sony MLS-X1 Users Guide - Page 474
Configuring Control Panel Network, Settings, Assigning/Releasing Licenses
View all Sony MLS-X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 474 highlights
Note When multiple LAN ports are selected, the same gateway is set. To identify the box corresponding to a LAN port Select the target LAN port and press the [Send Beacon] button to cause the front panel LED bars on the box corresponding to the selected LAN port to flash for 5 seconds. Configuring Control Panel Network Settings You can configure the network settings of a control panel that is assigned to a switcher in an island and of the control panel banks configured in the control panel. For details about configuring the network settings of a control panel not assigned to a switcher in an island, see "Configuring Control Panel Network Settings" (page 467). For details about configuring the network settings of control panel banks not configured in a control panel, see "Configuring Control Panel Bank Network Settings" (page 481). 1 Open the MLS Manager Home > System > Island > Panel Network menu (60211.07). 2 In the [Panel] group list, select the target control panel to set. 3 In the [Panel Bank] group, select [All] or [Selected]. All: Displays the control panel banks configured in all the control panels displayed in the list in the [Panel] group. Selected: Displays the control panel banks configured in the control panel selected in the list in the [Panel] group. 4 In the [Panel Bank] group, select the target control panel bank to set. Place a check mark for the target control panel bank to set (multiple selection supported). To select and set all control panel banks, place a check mark in the Select All checkbox. 5 Press the [Edit Panel Bank] button. A setup window for the selected control panel bank appears. 6 Press the [Hostname] button and enter a host name (up to 63 characters) using the keyboard. Note Cannot be configured when multiple control panel banks are selected. 7 Press the [Address] button for [IPv4] and enter an address using the keyboard. Note When multiple control panel banks are selected, consecutively numbered IP addresses are set. 8 Press the [Prefix Length] button for [IPv4] and enter a prefix length in the numeric keypad window. Note When multiple control panel banks are selected, the same prefix length is set for all the control panel banks. 9 Press [OK]. To identify a control panel bank Press the [Send Beacon] button in the [Panel] group to cause the buttons in all control panel banks configured in the selected control panel to flash for 5 seconds. Press the [Send Beacon] button in the [Panel Bank] group to cause the buttons in the selected control panel bank to flash for 5 seconds. Assigning/Releasing Licenses You can assign licenses to the switchers and boxes in an island. To assign a license, the license must be installed beforehand. For details about installing a license, see "Managing and Installing Licenses" (page 483). Licenses assigned to switchers: MZS-X1770: Automation IF License Licenses assigned to boxes: MZS-X1500: 4K Upgrade License MZS-X1750: HDR Converter License MZS-X1610: 3D DME License MZS-X1620: SL Key License MZS-X1800: Clip Player License 474